WTB Y splitter and disto

[farmerehsan 10+ year member]

I need a y splitter since im going to be using 3 amps in my truck

post up pic and price

also a distrabution block... 4 guage in and 4 guage out..if you got other just let me know

Click to read more...

 

[farmerehsan 10+ year member]

oh jeez lol.. i have 2 amps

1 four channel and 1 2 channel 1 mono amp

makin that a total of 4 sets(8 holes)

my steroe only has 3 sets (6 holes)

but my question is..since my 4 hole 4 channel amp is bridged would i use all of the inputs? or just 2?

 

[farmerehsan 10+ year member]

ttt

 

[fast306stang 10+ year member]

does your 4 channel amp have a 2ch or 4 ch input selector switch? If it does, you can use the 2ch input mode and bridge the outputs into 2 channels. Then you wouldn't need the splitters.

 

[farmerehsan 10+ year member]

does your 4 channel amp have a 2ch or 4 ch input selector switch? If it does, you can use the 2ch input mode and bridge the outputs into 2 channels. Then you wouldn't need the splitters.

ill have to check....

so whos gots distros

 

[KyleBechtold 5,000+ posts]

wrong.. you need to fill all of the rcas for bridged or full 4 channel..

so you need 2 splitters

 

[KyleBechtold 5,000+ posts]

i got a distro for ya..

 

[fast306stang 10+ year member]

wrong.. you need to fill all of the rcas for bridged or full 4 channel..
so you need 2 splitters

I'll take your word for it...I was 99.9 percent sure I had a 4 ch amp that worked that way but I can't check it since I no longer have it :|

Anyrate, I've got 2 Memphis 1f to 2m for 10 shipped if you want them...

 

[KyleBechtold 5,000+ posts]

what amp do you have.. most are the way i described.. but if they do have the selector switch like he stated then you don't need Ys

EDIT: to fast306stang i wasn't saying wrong to you i didn't see yours when i typed my reply

 

[wu501 10+ year member]

wrong.. you need to fill all of the rcas for bridged or full 4 channel..
so you need 2 splitters

I know form experience...every 4 channel amp I have ran bridged into 2 channels only requires 1 set of rca cables. Don't try to correct people when you don't even know what your talking about.

 

[KyleBechtold 5,000+ posts]

I know form experience...every 4 channel amp I have ran bridged into 2 channels only requires 1 set of rca cables. Don't try to correct people when you don't even know what your talking about.

see.. thing is i can say the same..

and what amps have you ran bridged that were 4 channel?

 

[farmerehsan 10+ year member]

so do i need rcas splitters or not?

 

[KyleBechtold 5,000+ posts]

so do i need rcas splitters or not?

what amp do you have? or.. does it have switches changing it from 4/3/2?

 

[wu501 10+ year member]

most recent amps I have done this were an eclipse xa4000 and a kicker zx650.4

I don't think you understand the concept. If you are running a 4 channel amp bridged down to channels there would be no reason whatsoever to have 2 sets of rcas' wired to the amp.

 

[farmerehsan 10+ year member]

what amp do you have? or.. does it have switches changing it from 4/3/2?

mrv-f300

 

[350zspl 10+ year member]

i have new stinger drone y adapters

5 or 6 eaches

i also have sound quest new y adapters as well