WTB/WTTF Stout 2 or 4 channel

[CHEMMINS 10+ year member]

Ok...requirements:

1. Minimum 1000 RMS

- 250 x 4 @ 4 or,

- 500 x 2 @ 2 .......MINIMUM.

2. Small footprint.

3. Full range.

4. Good condition.

Click to read more...

 

[TaylorFade 10+ year member]

2504x4@4 and small footprint? Sheesh.

This little one will get you close on the 500x2@2 though. Sweet little amp. I have one and it's tiny.

PrecisionPower - Products - Amplifiers - Phantom - P900.4

Either way, you'll need a Class D for that much power and a small footprint.

 

[Louisiana_CRX 5,000+ posts]

I'll have to say thats something I dont have //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif....If you could use 200x2 I could prob hook you up //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[TaylorFade 10+ year member]

Get a pair of these...

1x600W TAS5630 Class-D Amplifier Board 320-311

 

[Louisiana_CRX 5,000+ posts]

I think mine will do about 400x2 @ 2

 

[drockstar 10+ year member]

Ok...requirements:
1. Minimum 1000 RMS

- 250 x 4 @ 4 or,

- 500 x 2 @ 2 .......MINIMUM.

2. Small footprint.

3. Full range.

4. Good condition.

I have a Diamond Audio

D5 600.4

RMS Power:

75x4@4ohm

150x4@2ohm

300x2@2ohm

 

[Vertex Audio Pro Seller]

Ok...requirements:
1. Minimum 1000 RMS

- 250 x 4 @ 4 or,

- 500 x 2 @ 2 .......MINIMUM.

2. Small footprint.

3. Full range.

4. Good condition.

Would you be interested in ZED Leviathan III? It does 600wX 3 @ 4 ohms bridged. Its 16.14 inches in length so its pushing it. But it has enough power.

Also we have the new ZED Draconia III that can do 400wX 2 @ 4 ohms bridged. Its a lot shorter than the Leviathan at 10.82 inches in length. Let me know if you are interested and we can make a deal...

 

[CHEMMINS 10+ year member]

I have a Diamond AudioD5 600.4

RMS Power:

75x4@4ohm

150x4@2ohm

300x2@2ohm

Sorry bud, not near enough juice.

 

[CHEMMINS 10+ year member]

Would you be interested in ZED Leviathan III? It does 600wX 3 @ 4 ohms bridged. Its 16.14 inches in length so its pushing it. But it has enough power.Also we have the new ZED Draconia III that can do 400wX 2 @ 4 ohms bridged. Its a lot shorter than the Leviathan at 10.82 inches in length. Let me know if you are interested and we can make a deal...

Yeah I am looking at the 12 - 13" long range (just measured). So the lev 3 is right power, wrong length. The Drac, unless it is severely under rated, is going to leave me with too much sitting on the table.

This is a huge challenge to find. Thanks for posting them though guys. I am all ears to possibilities.

 

[CHEMMINS 10+ year member]

2504x4@4 and small footprint? Sheesh.
This little one will get you close on the 500x2@2 though. Sweet little amp. I have one and it's tiny.

PrecisionPower - Products - Amplifiers - Phantom - P900.4

Either way, you'll need a Class D for that much power and a small footprint.

450x2 @ 4 that one is...I need at 2 ohm if only 2 channel....lol.

 

[CHEMMINS 10+ year member]

Get a pair of these...
1x600W TAS5630 Class-D Amplifier Board 320-311

Lol...I don't have "Recommended power supply: 20 to 50 VDC,"....and that 600w is at 50vdc.....lol

 

---------- Post added at 12:41 PM ---------- Previous post was at 12:40 PM ----------

 

I think mine will do about 400x2 @ 2

Whatcha got....figured you may be one of the few who might actually have something to fit the bill.....lol.

 

[Vertex Audio Pro Seller]

Yeah I am looking at the 12 - 13" long range (just measured). So the lev 3 is right power, wrong length. The Drac, unless it is severely under rated, is going to leave me with too much sitting on the table.
This is a huge challenge to find. Thanks for posting them though guys. I am all ears to possibilities.

Im sure its underrated, I mean its stephen manz we are talking about here //content.invisioncic.com/y282845/emoticons/cool.gif.3bcaf8f141236c00f8044d07150e34f7.gif

 

[CHEMMINS 10+ year member]

Im sure its underrated, I mean its stephen manz we are talking about here //content.invisioncic.com/y282845/emoticons/cool.gif.3bcaf8f141236c00f8044d07150e34f7.gif

Yes, but it isn't able to be bridged at 2 ohms......only 4. Hence my problem there.

From the website:

Rated power is 125 watts x 4 into 4 ohm or 200w x 4 into 2 ohm

Bridged power is 250w x 2 into 8 ohm or 400w x 2 into 4 ohm.

I could do the 250x2 into 8 ohm, but still need 500 watts per side....lol.

 

[SplAffair 10+ year member]

http://www.caraudio.com/forums/amplifier-classifieds/552695-tru-tech-t2-200-a.html

Newegg.com - ROCKFORD FOSGATE T600-2 600W 2-Channel Car Amplifier

 

[CHEMMINS 10+ year member]

http://www.caraudio.com/forums/amplifier-classifieds/552695-tru-tech-t2-200-a.htmlNewegg.com - ROCKFORD FOSGATE T600-2 600W 2-Channel Car Amplifier

The Tru dimensions are 17.5"L x 10.5"W x 2.5"H (too long)

RF is 300 watts x 2 channels @ 2 ohms (not enough juice)

Thanks for those though.