wtb some tools

[miker 5,000+ posts]

Uhm.. DO NOT use MDF if you're cutting this inside your apartment.....

 

[1rockford1 5,000+ posts]

Uhm.. DO NOT use MDF if you're cutting this inside your apartment.....

lol all cuts out side. im gona just do the glueing inside. then im gona take it back outside then finish the sanding and sub cut out.

 

[miker 5,000+ posts]

lol all cuts out side. im gona just do the glueing inside. then im gona take it back outside then finish the sanding and sub cut out.

okay haha, MDF is just horrible and nasty..

 

[1rockford1 5,000+ posts]

i think im gona hit up walmart for there skillz jig/circular saw . i should get it for like 75.00 then another 30 for a new drill so all said i should b up around 140 ish with glue my new tools etc. thanks guys

 

[1rockford1 5,000+ posts]

okay haha, MDF is just horrible and nasty..

oh yea just gona do the cuts outside go inside its getin cold and where i live there d-bags and there is alot of kids and i dont want them around anything could happen. im just gona go to wally world and get some basic tools. tbh i never built a box but i know i can get it done. thanks

 

[miker 5,000+ posts]

For straight cuts with the circular saw your going to need a straight piece of wood for a guide and clamp it on either end, and always make sure that there is support under what you're cutting otherwise your saw could kick back and or ruin your cut.

 

[1rockford1 5,000+ posts]

For straight cuts with the circular saw your going to need a straight piece of wood for a guide and clamp it on either end, and always make sure that there is support under what you're cutting otherwise your saw could kick back and or ruin your cut.

im gona do the bucket things and get a few clamps. i just wanted to see if i could buy some stuff on the cheap. sh it i would buy some glue/ sandpapper /screws etc at this point.

 

[king nothing 10+ year member]

I cant believe no one has mentioned the pawn shop. Our local pawn shops have jigsaws, circular saws, and drills coming out their *** for cheap. like 15-30 bucks apiece

 

[matt_bennett05 10+ year member]

//content.invisioncic.com/y282845/emoticons/iagree.gif.15d6c075ee8d3913ba26866d06993068.gif This isn't this man's first pony ride.

 

[bunkrd you 10+ year member]

saw horses should be found cheap on craigslist along with tools, bro.

 

[bunkrd you 10+ year member]

screws and glue are uber cheap. You can get 1lb of screws for less then five bucks and titebond 2 is like 4 bucks.

 

[z0n3d0u7 10+ year member]

If you wanna buy Quality, I got a few dewalt drills i could sell [14.4v and 18v], but they wouldnt be anywhere around $30 you have planned to spend.

 

[1rockford1 5,000+ posts]

i got some good tools on the cheap they where marked down . i put them to use yesterday and tbh there not bad. the sheet sander on the othere hand is not to good. i think i just need to get down using it . i was doing a up and down motion over the wood that need to b sanded. i have 2 pony corner clamps on ebay i won for 6.00 shipped lol. all metal as well

 

[king nothing 10+ year member]

I built some serious sawhorses for 20 bucks in materials