WTB 5.25 components, 8's and misc.

[sicbouge5150 10+ year member]

Hey, i'm looking to put a system in my mark viii here real soon.

I'm looking for a pair of descent 5.25s that will do about 100rms at 4ohms and a descent pair of 8's that will do about 200rms at 2ohms(ea)

I'm also looking for all the stuff to do the big 3 and for power to my amps in 1/0awg (terminals, fuse holder, distro block(1 1/0 in and 2 4 outs), wire, and ring terminals.) I know someones gotta have some descent stuff they want to get rid of. Thanks.

Click to read more...

 

[shortyg83 10+ year member]

I have a set of infinity comps for sale they are a little marked up but it doesn't affect performance

 

[blackbonnie 5,000+ posts]

i have 8 1/2 feet of elemental designs 4459 strand 1/0 wire. great for the big 3. and i can also sell you as many crimp ring terminals as you need. they are heavy duty copper lugs, that accept a 3/8 stud. PM me if your interested and we will talk

 

[tRidiot 10+ year member]

What do you want the 8s for? Midbass or sub duty?

I've got a pair of Beals Brothers 2 ohm SVC 8s that I used for midbass. They do very well freeair in doors, play well down to 40-50Hz. Pretty decent output, sound good. I've replaced them with JL 8IB4s, but they're good cheap midbasses.

I'd take $40 shipped for 'em. They're cheap, but they are a GREAT budget midbass, I'd say. Played fine to my cutoff point of 250Hz or so. Not sure about response above that line.

 

[sicbouge5150 10+ year member]

I have a set of infinity comps for sale they are a little marked up but it doesn't affect performance

You have pics and how much you looking to get for em?

 

[Louisiana_CRX 5,000+ posts]

I have a BNIB RE 8 DVC I ended up not using....

 

[sicbouge5150 10+ year member]

What do you want the 8s for? Midbass or sub duty?
I've got a pair of Beals Brothers 2 ohm SVC 8s that I used for midbass. They do very well freeair in doors, play well down to 40-50Hz. Pretty decent output, sound good. I've replaced them with JL 8IB4s, but they're good cheap midbasses.

I'd take $40 shipped for 'em. They're cheap, but they are a GREAT budget midbass, I'd say. Played fine to my cutoff point of 250Hz or so. Not sure about response above that line.

I do want them for midbass, you got any pics? And I don't know anything about that brand, they'll do ok with about 200rms?

 

[trunks9_us 10+ year member]

how much you looking to spend?

 

[sicbouge5150 10+ year member]

I'm pretty open, I'm just not rich...so..whatever that means, I haven't fully decided. I'm willing to pay for descent stuff.

 

[trunks9_us 10+ year member]

Zapco RM-6B.130 - 5.25"/130mm Midrange BNIB 325 shipped.

Suggested Retail $777.00

let me know if your interested comes with crossovers as well.

 

[sicbouge5150 10+ year member]

Well, i'm interested, but that is a little over my intended budget.

 

[trunks9_us 10+ year member]

well there great speakers if your looking for trade let me know what you got. can be car audio or not car audio.

 

[tRidiot 10+ year member]

Beals Brothers was a startup that never got off the ground, apparently. I don't know much of anything about them. The speakers I believe were rated for 150RMS, so 200W would be fine. Keep in mind, they are 2 ohm SVC, as well.

I'll snap some pics in a few minutes and get 'em up for ya.

I was pretty pleased with them for straight midbass duty freeair in damped doors. Ran them with steep crossovers at 40/50/63Hz-250Hz, depending on my mood at the time, how loud I was playing it, and what type of music. My headunit allowed me to constantly change my settings and I loved it.

Stand-by for pics. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[tRidiot 10+ year member]

Crap man... just checked 'em out and one of the cones is separating from the surround. Coupla years in my doors will do that, it seems. //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif I doubt you'll be interested, since it would have to be glued.

Sorry to waste your time.

 

[sicbouge5150 10+ year member]

not a waste sir, you were using your time to try and help me out. Though I am not really interested in them now, I appreciate it.