Wtb 4 channel doing at least 100 @ 4/8 ohms

[loudenuff]

Have yet to buy speakers so not sure if I'm going 4 or 8 ohms. Budget is less than 200

Click to read more...

 

[Popwarhomie 5,000+ posts]

https://www.amazon.com/SAX-200-4-Sundown-Audio-4-Channel-Amplifier/dp/B004LYRYVE

 

[audiobaun 5,000+ posts]

https://www.amazon.com/dp/B005KVEPVO/?tag=googhydr-20&hvadid=177186690178&hvpos=1t1&hvnetw=s&hvrand=17376623721444259800&hvpone=&hvptwo=&hvqmt=b&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=1026741&hvtargid=kwd-95243541770&ref=pd_sl_2t2gpubop7_b

Great little amp for the money

 

[loudenuff]

https://www.amazon.com/dp/B005KVEPVO/?tag=googhydr-20&hvadid=177186690178&hvpos=1t1&hvnetw=s&hvrand=17376623721444259800&hvpone=&hvptwo=&hvqmt=b&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=1026741&hvtargid=kwd-95243541770&ref=pd_sl_2t2gpubop7_bGreat little amp for the money

Forgot about ppi. Thanks for the suggestion that'll probably be my pick

 

[Papermaker85 5,000+ posts]

that PPI sounds like ****. stop buying that ******* junk. if you spent a few extra dollars you could buy a nice used amp that is MUCH better. and why are you buying 8 ohm drivers? unless its a tweeter its pointless. most tweeter wont handle more than 50 RMS anyways

 

[audiobaun 5,000+ posts]

Forgot about ppi. Thanks for the suggestion that'll probably be my pick

Yes sir..Has great Xover on it too,and a hell of a small footprint. The 600.2 is no slouch either, not as good of a xover on it as the 900.4 though. I think this series has been pretty reliable for me thus far

 

[audiobaun 5,000+ posts]

that PPI sounds like ****. stop buying that ******* junk. if you spent a few extra dollars you could buy a nice used amp that is MUCH better. and why are you buying 8 ohm drivers? unless its a tweeter its pointless. most tweeter wont handle more than 50 RMS anyways

My Zed Micros sound alot better, but the 900.4 isnt a bad amp and sounds pretty clean for the money

 

[Papermaker85 5,000+ posts]

My Zed Micros sound alot better, but the 900.4 isnt a bad amp and sounds pretty clean for the money

guess not everybody cares about music.lol i mean i got a used PG xenon 200.4 for 280. its not higend but it uses good parts and it a good design. hell of a lot better than 90% of the stuff on the market under 500 bucks for for sure. give me 5 mintues ibet i find him something decent..

 

---------- Post added at 06:26 PM ---------- Previous post was at 06:25 PM ----------

 

http://www.caraudio.com/forums/amplifier-classifieds/628730-phoenix-gold-xenon-x100-4-a.html

 

[Papermaker85 5,000+ posts]

Mmats sq4160 - Car Audio Classifieds

this is a ******* STEAL one of the best amps money can buy built in America

 

[audiobaun 5,000+ posts]

guess not everybody cares about music.lol i mean i got a used PG xenon 200.4 for 280. its not higend but it uses good parts and it a good design. hell of a lot better than 90% of the stuff on the market under 500 bucks for for sure. give me 5 mintues ibet i find him something decent.. 

---------- Post added at 06:26 PM ---------- Previous post was at 06:25 PM ----------

 

http://www.caraudio.com/forums/amplifier-classifieds/628730-phoenix-gold-xenon-x100-4-a.html

Ive prob got a good used amp sitting that would be better than alot of todays amps for sure, but for under $200 bucks with a decent xover compact in size a bnew with a warranty and the rms power, the 9004 is almost a steal for the money...I meam My Autotek BTS 7204 is better than most 4 ch. in the same wattage range of todays amps, my Gemeni VII, JBL GTQ 400, a few others Most want BNEW and with a warranty these days.Hard to buy used and trust sellers these days.I dont blame most people

 

[audiobaun 5,000+ posts]

Mmats sq4160 - Car Audio Classifiedsthis is a ******* STEAL one of the best amps money can buy built in America

Deff not under $200 bucks that the OP is searching for..almost double his budget:awesome:

 

[Papermaker85 5,000+ posts]

Deff not under $200 bucks that the OP is searching for..almost double his budget:awesome:

if he saves for one more month he could have something he is PROUD to own.. lol

 

[audiobaun 5,000+ posts]

I saw this amp.Not sure about the new version, but the older version were fantastic!

NEW Old School Design US Acoustics 4 Channel amplifier,Amazing SQ,700 watts RMS | eBay

 

[BOOMINGRANDPA 5,000+ posts]

Have yet to buy speakers so not sure if I'm going 4 or 8 ohms. Budget is less than 200

Here dude.. http://www.caraudio.com/forums/amplifier-classifieds/630585-soundstream-rubicon-4-600-%24100-shipped.html

 

[Jeffdachef 5,000+ posts]

https://www.amazon.com/Soundstream-TN4-900D-4-Channel-Tarantula-Amplifier/dp/B009NLNY14

same as the ppi 900.4

 

[Jeffdachef 5,000+ posts]

Yes sir..Has great Xover on it too,and a hell of a small footprint. The 600.2 is no slouch either, not as good of a xover on it as the 900.4 though. I think this series has been pretty reliable for me thus far

PPI is good for the money but the 600.2 phantom flat out lost to my ct 125.2 in every way possible with direct swaps. The CT costed 99 new lol. Output and clarity in both speaker and subwoofer test the ct pulled ahead miles away definitely feels like the CT had a lot more clean power. The ppi also had a lot less midbass.

 

[loudenuff]

PPI is good for the money but the 600.2 phantom flat out lost to my ct 125.2 in every way possible with direct swaps. The CT costed 99 new lol. Output and clarity in both speaker and subwoofer test the ct pulled ahead miles away definitely feels like the CT had a lot more clean power. The ppi also had a lot less midbass.

I'm kinda leaning on this... rated at 12.8v as well. https://www.ct-sounds.com/products/amplifiers/m-75-4.html Anyone have thoughts on these? I loved my little white amp. Never seen these red ones before

 

[Guyver 10+ year member]

Should get this https://www.amazon.com/Zapco-ST-4XSQ-Studio-Channel-Amplifier/dp/B013F34IU6

 

[trumpet 5,000+ posts]

Should get this https://www.amazon.com/Zapco-ST-4XSQ-Studio-Channel-Amplifier/dp/B013F34IU6

I will be adding this model to the Rubyserv web site tonight. Nobody will need to link to Amazon.com anymore. //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[Papermaker85 5,000+ posts]

I will be adding this model to the Rubyserv web site tonight. Nobody will need to link to Amazon.com anymore. //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

So id like to help you out.. i like your brand choices..