WTB 300+ wrms amp

[DS Autosports 10+ year member]

Cosmetics don't really matter, but need to be in good condition and produces a clean signal. I need 300+wrms @ 1ohm-mono; looking to run d2 8". I have $$ and a MTX 2150x to trade. let me know what you have. Prices shipped to 27592

Click to read more...

 

[THIRSTYCREW 10+ year member]

I Have A Jl Audio 300/2v2 Used For 1 Month $185 Shipped In The US

 

[DS Autosports 10+ year member]

I Have A Jl Audio 300/2v2 Used For 1 Month $185 Shipped In The US

Thanks, but I'm only offering the mtx and $50 total. This is for a cheap project so i don't need anything special just does rated power.

 

[mk_ 10+ year member]

Someone is selling jbl 300.1's in the classifeds for pretty cheap. 300wrms @ 1 or 2 ohms

 

[Shinju 10+ year member]

Caver KLW 2150 300rms 4ohm Made in the Good Ole USA.

Whats wrong with the 2150x?

 

[DS Autosports 10+ year member]

Someone is selling jbl 300.1's in the classifeds for pretty cheap. 300wrms @ 1 or 2 ohms

Thanks, I'll look into it. Need it rated @ 1ohm

Caver KLW 2150 300rms 4ohm Made in the Good Ole USA.
Whats wrong with the 2150x?

No problems with the 2150x, it bridges @ 4ohms and I need a cleaner signal.

 

[da box king 10+ year member]

I got a hifonics titan bxi4006

400x1@ 4 ohm bridged

 

[DS Autosports 10+ year member]

I haven't used a hifonics amp before, how clean is the signal?

 

[Shinju 10+ year member]

No problems with the 2150x, it bridges @ 4ohms and I need a cleaner signal.

The Carver is a SQ piece so its going to have a cleaner signal then quite a few amps and its built like a tank.

But I see you edited your orignal post from wanting 1ohm-4ohm power to 1ohm. I dont have anything that small for 1ohm.

GL!

 

[da box king 10+ year member]

I haven't used a hifonics amp before, how clean is the signal?

not sure I haven't used it. Spec's say 95db s/n

I just got the amp was gonna use it on a budget system for the girl

 

[cj407]

i have a Phoenix Gold ZX500..does 600 @ 4ohm...it'll run cooler and more efficient than 300 at 1 ohm....

 

[DS Autosports 10+ year member]

No problems with the 2150x, it bridges @ 4ohms and I need a cleaner signal.

The Carver is a SQ piece so its going to have a cleaner signal then quite a few amps and its built like a tank.

But I see you edited your orignal post from wanting 1ohm-4ohm power to 1ohm. I dont have anything that small for 1ohm.

GL!

shoot me pics and spec

 

[thegreatestpenn 5,000+ posts]

i have a fusion en am8001 that I ran at 1ohm and didn't have any problems, but its not rated to be 1ohm stable by the manufacturer. 75 shipped to carolina

http://www.caraudio.com/forum/showthread.php?t=442403

 

[DS Autosports 10+ year member]

i have a fusion en am8001 that I ran at 1ohm and didn't have any problems, but its not rated to be 1ohm stable by the manufacturer. 75 shipped to carolinahttp://www.caraudio.com/forum/showthread.php?t=442403

What are normal specs?

 

[thegreatestpenn 5,000+ posts]

250wrms@4ohm, 363wrms@2ohm