WTB: 2 Channel SQ amp

[mark1478 10+ year member]

looking for a two channel SQ amp, or a 4 channel i can bridge into two. Amps like Audison, ARC, Mcintosh, TRU etc etc. Id like it to be around 150 watts at 4ohms. Thanks!

Click to read more...

 

[nuttcase21 10+ year member]

i have an orion XTR200 for sale. same thing as the orion NT200, just red. amp does over 150watts @ 12v and 985 watts bridged. argueably one of the cleanest amps ever made. got pics, PM me.

 

[Upgrayedd 10+ year member]

I have a few adcom 4402 black with no fan cover and white with. I also have a black 4304, just sold my white one. Have a 4404 too but I dont see getting enough from it to justify getting rid of it.

 

[RJesus 10+ year member]

eclipse EA4100

scratched up a bit, works great though.

4x75 // 2x150

where in new jersey are you?

I can let you have it for $110 picked up

 

[6spdcoupe 5,000+ posts]

Why the thought of need for the power you listed ?

There are still some available here ..

http://www.diymobileaudio.com/forum/classifieds/62259-lots-nice-gear-has-go.html

Not much that I honestly cant offer you, but all things come with a cost...

 

[mark1478 10+ year member]

im not sure why your asking that... u dont think a 150 watt amp will outperform a 75 watt amp?

 

[6spdcoupe 5,000+ posts]

Because all are created equal ? Im not sure why your not answering that.

 

[mark1478 10+ year member]

well right now im running a JL 300/2 to focals and an xtant 302a to my subs. My xtant just crapped out, so i figured i would move the JL to the subs and buy a nice sq type amp for my focals. I would like it to be around 150 watts like my JL because im used to the volume, but i wouldnt mind dropping down to around 100 watts at 4ohms since most amps are underrated anyway.

 

[Upgrayedd 10+ year member]

Going by specs alone, my adcom is rated 110x2 @4ohm bridged. But this is under rated. They were rated full bandwidth at 12v, not 1khz at 14.4. I believe tested they were close to 60x4@4ohm. Stable to 1/2 ohm. If you are interested let me know.

 

[6spdcoupe 5,000+ posts]

well right now im running a JL 300/2 to focals and an xtant 302a to my subs. My xtant just crapped out, so i figured i would move the JL to the subs and buy a nice sq type amp for my focals. I would like it to be around 150 watts like my JL because im used to the volume, but i wouldnt mind dropping down to around 100 watts at 4ohms since most amps are underrated anyway.

Where in NJ are you ? How bout we try a few amps in your car and you can judge from there. Specs can be told after listening. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[mark1478 10+ year member]

i just saw your post on DIY..pretty cool. You own a shop in NJ? Just bought a house in morristown //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif is that list all you have laying around?

 

[6spdcoupe 5,000+ posts]

Thats correct. Nah, I have other things laying around as well as some new product in stock.

Congrats on the purchase, Morristown isnt to far from Edison. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[THIRSTYCREW 10+ year member]

I Have A Jl Audio 300/2v2 Used For 1 Month $185 Shipped

 

[mark1478 10+ year member]

ya. unfortunately I cant buy new because i just bought my house lol. But I dont mind spending around 5 bills for a good sq amp though. they last forever anyway if you dont abuse it. I was eyeing a Zapco C2K 4.0. I was thinking of running for front stage 100 x 2 and bridging the rear. Do u know if that amp can handle a 2 ohm load bridged?

Thats correct. Nah, I have other things laying around as well as some new product in stock.
Congrats on the purchase, Morristown isnt to far from Edison. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[Millertime1028 10+ year member]

Have MINT condition Alpine MRV-t757. $155 shipped

Output Power at 14.4V (20Hz ∼ 20kHz):

2 x 100W @ 4 ohms (0.04% THD)

2 x 200W @ 2 ohms (0.3% THD)

1 x 400W @ 4 ohms Bridged (0.3% THD)