WTB: 1000 Watt Mono Amplifier

[myG37 10+ year member]

I am looking for a 1000 watt mono amplifier that is in good looking condition and working excellent.

I can also maybe, look for a 1000-1500 watt range also.. But 1000 shall do fine.

I am not looking for some really cheap "hifonics or crunch" amps.

Give me a post or PM with a picture please of what you got.

Thank You!

Click to read more...

 

[Techmaster05 10+ year member]

check out the audiopipe 1500d

 

[1rockford1 5,000+ posts]

check out the audiopipe 1500d

yea but im not sure if those are power hungry amps . they can b had for 160ish well the 1800d can b had for 188 or so.

 

[infamous_e46 5,000+ posts]

alpine mrv-1507 old school v12 series superb sq and alot of adjustability and very underrated

i am in el centro only about 2 hours away

we can meet up or i can do 300 shipped O.B.O

 

[myG37 10+ year member]

check out the audiopipe 1500d

If my two 12"s hitting 800 watts rms together.. Will that 1500d watt work? Without problems?

 

[myG37 10+ year member]

check out the audiopipe 1500d

If my two 12"s hitting 800 watts rms together.. Will that 1500d watt work? Without problems?

 

[95BlackGA 5,000+ posts]

What ohm load you need the power at? I got a Directed D2400 that does 1200WRMS @ 1 ohm, 800WRMS @ 2 and 400WRMS @ 4ohm. $225 shipped.

 

[nate56 10+ year member]

have a elevation DX 1500.1 for 220 shipped

 

[myG37 10+ year member]

What ohm load you need the power at? I got a Directed D2400 that does 1200WRMS @ 1 ohm, 800WRMS @ 2 and 400WRMS @ 4ohm. $225 shipped.

4 ohms I think.. I am have no clue how this goes.

 

[-01limited- 10+ year member]

4 ohms I think.. I am have no clue how this goes.

what subs do you have and what voice coil configuration are they? and then how do you have them wired. that will tell ya what ohm load you'll be puttin on the amp.

 

[Oh6AcCoRd 10+ year member]

memphis 16-mc1500d

1500@2

750@4

ive heard its a little underrated.

225 shipped

 

[myG37 10+ year member]

what subs do you have and what voice coil configuration are they? and then how do you have them wired. that will tell ya what ohm load you'll be puttin on the amp.

I have dual Pioneer TS-W308D4

http://www.pioneerelectronics.com/PUSA/Products/CarAudioVideo/Subwoofers/Champion/TS-W308D2|D4?tab=B

Watts MAX. Music Power 1400 Watts

Watts Nominal Power Handling 400 Watts

Frequency Response 20 ~ 180Hz

Sensitivity D2 (90dB) D4 (92dB)

Ohm Rating D2: (1 or 4 ohm) D4: (2 or 8 ohm)

So I am guessing.. I will be using a 2 or 8 ohm?

I haven't wired them up on the box yet, I am letting my friend do this..

 

[Flastrongman 10+ year member]

I have a mint Alpine PDX 1000.1, 1000@2 or 4ohm $300 shipped

 

[95BlackGA 5,000+ posts]

I have dual Pioneer TS-W308D4
Pioneer USA - TS-W308D2|D4 - 12" Champion Series Subwoofers with 1400 Watts Max. Power

Watts MAX. Music Power 1400 Watts

Watts Nominal Power Handling 400 Watts

Frequency Response 20 ~ 180Hz

Sensitivity D2 (90dB) D4 (92dB)

Ohm Rating D2: (1 or 4 ohm) D4: (2 or 8 ohm)

So I am guessing.. I will be using a 2 or 8 ohm?

I haven't wired them up on the box yet, I am letting my friend do this..

You will need to make your power at 1ohm or 4ohm. They are dual 4 ohm voice coils. Wire all 4 in parallel to make 1ohm (all positive to positive, negative to negative). Wire each sub in series (positive from one coil to negative to the other), then wire both subs in parallel to make a 4ohm load. It'll be easier/cheaper to get your power at 1ohm most likely.

 

[ben031681 10+ year member]

have a elevation DX 1500.1 for 220 shipped

great amp and deal here!