Would this work?

[BigOleDom 10+ year member]

I need to make a new box for my crossfire 15's, go ahead and laugh, they are the db3 series. Would this box work?

36 inches wide x 16 inches tall. Then 25 inches deep at the top, and 27 at the bottom. Comes out to 5.625 cubes, tuned to 33 hz.

I was planning on mouting the subs on the top, in an offset pattern.

Click to read more...

 

[Ellsworthz 10+ year member]

if you mount in an offset pattern, wouldn't you hit the port?

 

[BigOleDom 10+ year member]

whoops, port is only 6 inches wide

 

[BigOleDom 10+ year member]

I'd put one really close to the front and the port, other one in back corner.

 

[ahillworks 10+ year member]

I'd put one really close to the front and the port, other one in back corner.

I second that!

 

[BigOleDom 10+ year member]

I second that!

was that sarcasm, or actual response?

 

[ahillworks 10+ year member]

was that sarcasm, or actual response?

No I was being real. I was thinking on how the air would flow in the box.

 

[Blinkrazy 10+ year member]

use the re box calculator

but offset doesn't matter as long as they are braced properly

 

[BigOleDom 10+ year member]

I used the re box calc, just wondering if that would be enough space for those subs.