Wiring Confusion

[drifterman33 10+ year member]

Look at the picture and this is were i am confused on what to do!! How do you wire that???? THANKS

Click to read more...

 

[Blove1991 10+ year member]

Just put the wire from amp into Positive on the first sub and run another wire out from that same Posi to the other subs Positive

Same for Negative

Then finish diagram

 

[lostdaytomorrow 10+ year member]

Think of that as the terminal cup inside the box.

 

[drifterman33 10+ year member]

Just put the wire from amp into Positive on the first sub and run another wire out from that same Posi to the other subs Positive
Same for Negative

Then finish diagram

So can you connnect to wires to one positive port on the sub??

 

[bigt 10+ year member]

dude their are two wires when your wiring speakers, and their together, pull them apart and you will get two smaller ones. look at speaker wires http://img.alibaba.com/photo/50647439/Speaker_Wires.jpg

 

[drifterman33 10+ year member]

dude their are two wires when your wiring speakers, and their together, pull them apart and you will get two smaller ones. look at speaker wires http://img.alibaba.com/photo/50647439/Speaker_Wires.jpg

Sorry im a newb and i thouhght one was for positive and one is for negative!!

 

[tEh koRnDog 5,000+ posts]

seriously, before you do any installs

do yourself a favor, and read up

connect a wire from positive on the sub to the positive on the amp, same for negative. not rocket science

 

[drifterman33 10+ year member]

the box that i am using has two terminals... so would that still let me wire in parrallel??

 

[tEh koRnDog 5,000+ posts]

the box that i am using has two terminals... so would that still let me wire in parrallel??

use 1 terminal?

 

[drifterman33 10+ year member]

Heres a picture of my subs in a box that i will get with the two terminals....will this work....and will it sound good??

 

[tEh koRnDog 5,000+ posts]

how is the original picture you psted so hard to understand?

 

[drifterman33 10+ year member]

how is the original picture you psted so hard to understand?

I would rather use both of the terminals...is there any way of doing so??

 

[bikinpunk 10+ year member]

then, share the amplifier's + & - output. Run two lines from the amp and one of each into each terminal. ??? I guess.

I just say to use one terminal cup.

 

[tEh koRnDog 5,000+ posts]

drifter, respond to your pm's