will this work

[miked_mad 10+ year member]

Okay, right now I have two l7 15s on two kicker 600.1. I wan't to get two more for a custom trunk.I want two get two kicker 2500.1. now do I get two d4 or d2 ohm.and will the amps be to big? any suggestions would be helpful, thanks

Click to read more...

 

[Bdawg15 10+ year member]

yes way too big.

 

[miked_mad 10+ year member]

amps are to big?

 

[j3bus2k3 5,000+ posts]

haha...no, those 4 15" L7's will eat every bit of those 2 2500's. Set your gains modestly and get 4 D2's and wire 2 subs per amp for a 2ohm load per amp. But if you want to get alittle crazy...get 4 d4's and wire 2 d2's to a 1ohm final load per amp....

 

[miked_mad 10+ year member]

whats a d2

 

[j3bus2k3 5,000+ posts]

D2=Dual 2 ohm, D4=Dual 4ohm...

 

[tohighpsi 10+ year member]

dual 2ohm voice coils

 

[miked_mad 10+ year member]

I thought u ment a name of an amp my bad

 

[miked_mad 10+ year member]

If the amp is 2 ohm stable It won't mess it up to put a 1 0hm load on it?

 

[j3bus2k3 5,000+ posts]

nah, just make sure you have a stable electrical system...Big-3, high amperage alternator and maybe an extra batt...

 

[miked_mad 10+ year member]

Thanks for the help

 

[miked_mad 10+ year member]

gonna get two optimas

 

[j3bus2k3 5,000+ posts]

Good start. I'd recommed doing the Big-3 under the hood to as well as running power AND ground to the batts in the back...

 

[miked_mad 10+ year member]

have the big three and ho alt.

 

[miked_mad 10+ year member]

u have to put a anl fuse on the 2 batts ,right