Will this amp be able to power my speakers and subs

[VDUBKG 10+ year member]

Will a Sound Ordnance M-4100 amp http://www.crutchfield.com/p_777M4100/Sound-Ordnance-M-4100.html?tp=35782 have the power to supply Sound Ordnance B-24 subs http://www.crutchfield.com/p_777B24/Sound-Ordnance-B-24.html?tp=112 and Alpine SPS-600C http://www.crutchfield.com/p_500SPS600C/Alpine-SPS-600C.html?tp=106 speakers with clear sound with my Pioneer DEH-4300UB receiver. Currently my speakers crack at high volume without the amp and sub.

Click to read more...

 

[Phoenix Risen 10+ year member]

it will make them play yes. how well is a very different question. i have my doubts about that amp doing what it says and being able to do it without clipping.

 

[VDUBKG 10+ year member]

it will make them play yes. how well is a very different question. i have my doubts about that amp doing what it says and being able to do it without clipping.

Would this amp Alpine MRP-F300 V-Power Series 4-channel car amplifier 50 watts RMS x 4 at Crutchfield.com power the speakers and subs without cracking?

 

[Bettr n' Revrse 5,000+ posts]

What subs?

 

[Phoenix Risen 10+ year member]

if the SO does rated then the alpine is less power.

whats your budget on a 4 chan?

 

[VDUBKG 10+ year member]

if the SO does rated then the alpine is less power.
whats your budget on a 4 chan?

The Alpine seems to be of a better quality than the SO amp and will probably actually exert as much power as it says it does. I'm not sure tho.. and the subs im talking about are these Sound Ordnance™ B-24 Bandpass enclosure with two 12" subwoofers at Crutchfield.com I can spend up to $200 on the amp. I haven't bought those subs yet so any suggestions are good I'mwilling to spend up to $200 on subs also

 

[Phoenix Risen 10+ year member]

forget about those subs. get a single ssa dcon 12 an an audioque 4x90.

get the dcon in S4 and run it bridged on the rear channels and use the front 2 to run your comps.

 

[Bettr n' Revrse 5,000+ posts]

That ^^^

 

[Phoenix Risen 10+ year member]

and dont just throw the dcon in a prefab box if you decide to go that route. building your own box is pretty easy and can be a lot of fun with the right people. not to mention the performance difference is more than worth it.

 

[Bettr n' Revrse 5,000+ posts]

Whats the box specs on those?

 

[VDUBKG 10+ year member]

forget about those subs. get a single ssa dcon 12 an an audioque 4x90.
get the dcon in S4 and run it bridged on the rear channels and use the front 2 to run your comps.

Alright cool, I'm going to get these as soon as I get my next check. Cheers, thanks for the help man!

 

[Bettr n' Revrse 5,000+ posts]

I may have a box for you OP

 

[Phoenix Risen 10+ year member]

i would do 2 cubes or just a touch over at ~30hz. depends on the power as well. maybe a bit bigger bridging one of of the rear channels of a 4x90.

 

[VDUBKG 10+ year member]

I may have a box for you OP

Awesome' date=' the specs on the dcon are here, http://www.soundsolutionsaudio.com/store/products/DCON%252d12-S4-%E2%80%93-Sound-Solutions-Audio-12%22-300W-Single-4%252dOhm-DCON-Series-Subwoofer.html does your box fit it ?

 

[Bettr n' Revrse 5,000+ posts]

i would do 2 cubes or just a touch over at ~30hz. depends on the power as well. maybe a bit bigger bridging one of of the rear channels of a 4x90.

Really?! Man I didnt think those subs needed that much... My box is 1.7 or a little bigger at 31 how do you think it would do?