Will all this cause interference?

[boddy 10+ year member]

When my new amp and 6x9's comes i will be running a rca sub out, a rca preout, remote wire, 2 80w speaker wires from my new amp to my front component speakers and 2 40w speaker wires from my headunit to my 6x9's mounted in the rear. I cant put any of them on the other side as there will be 2 power cables for my active sub and new amp.

Click to read more...

 

[audioholic 5,000+ posts]

Your h/u wont be producing 40 watts per channel, you've been fooled by marketing BS.

Induced noise via power cables into RCA signal cables is greatly over hyped.

 

[keep_hope_alive Premium Member]

i also route low-level signal away from power - but it's out of habit and not because i am afraid of noise. mostly it is because of space and i loom all wires. power wire takes up most available space on one side.

having speaker wires and RCA's and remote on the same side is fine. speaker wire and power can live on the same side without issues as well - if it shortens the wire run for that side.

what hu, amp, comp speaker, 6x9 make/model?

 

[boddy 10+ year member]

So it will work then with all them wires close together? And i know my headunit wont be pushing 40w but im not really bothered im only installing the 6x9's because i got them cheap and there mainly for people in the back complaining to turn the bass down because thats all they can hear.

My headunit is a tevion not that special really, got some edge ED306 component speakers, some sony XS-F6932 6x9's and got an edge ED7400 amp on the way. I also have a vibe CBR12 active sub.