why is this happening???

flava30
10+ year member

Senior VIP Member
After playing my stereo for a few hours and then switching CD's my voice cuts off and only bass is heard. The thing is that after I turn the head unit off and then on, not even a minute later the voice comes on...Is my amp getting too hot and if it is, why would it come back on after less then a minute and stay on until I switch CD's and have to go through the same process described above?

Head unit: Pioneer DEH-580mp

Speakers:

front door: (2) whip audios 6.5" 100w rms/200w

rear fill: (2) O2 audio 6.5" 100w rms/200w

subwoofer:Kicker solo baric L7 12" in a ported enclosure

Amps:

for sub: KICKER ZX750.1 MONO CLASS D

for speakers: Kicker ZX850.4 (bridged to 2 channels)

since the speakers are 8 ohms I have them on parallel to equal 4 ohms

I also have a Hifonics HFXR 2 crossover and a 1.5 farad capacitor

 
they are 8ohms speakers paired together for a 4ohm load... and the 4 channel amp is bridged to 2 channels with two speakers on each channel equaling a 4ohm load per channel...The thing is if it is going into protect mode why would it come back on and stay on? wouldn't it go into protect mode immediately and stay there?

 
but why would it come on so quickly and stay on? I would figure that if it cuts off it should stay off longer, no?

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

flava30

10+ year member
Senior VIP Member
Thread starter
flava30
Joined
Location
NYC
Start date
Participants
Who Replied
Replies
10
Views
575
Last reply date
Last reply from
flava30
IMG_20260516_193114554_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0
IMG_20260516_192955471_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0

New threads

Top