which would get louder?

[statonburrell 10+ year member]

i think the cone area would even out with the little extra power the 8's would be getting compared to the 10's. id do the 10's and run the amp at 1ohm

ok cool, and do you think those specs are right?? i've never seen a 10 be recommended for .7 cubes ported..

 

[hzsogood 5,000+ posts]

lol why not?

for burps , from what I have heard from Sundowz, there fine.. I wouldnt run them at 1/2 daily.. no way

 

[hzsogood 5,000+ posts]

how bout 2 8s ..

 

[hzsogood 5,000+ posts]

that box is way to small

rip out them f'n backseats to.. Its a truck , its not supposed to have them anyways

 

[statonburrell 10+ year member]

well if u tune it to 35hz it should sound great! and should do a 140 burp with two of em! and what amp and electric?? i dont see why it wond do the 30s and sound great??

1/0 ran from the battery to under the driver seat where it meets a distro block and goes into 2 4 awg wires, one feeds the saz 1000d the other feeds the 50.4. Stock alt is 130 amper.. I could do the big 3 but haven't had a need to...

 

[statonburrell 10+ year member]

that box is way to small

rip out them f'n backseats to.. Its a truck , its not supposed to have them anyways

i'm not concerned about getting it rediculously loud... i have an older 4runner that I drive most of the time that I plan on making somewhat loud..

 

[deathpenalty18 10+ year member]

1/0 ran from the battery to under the driver seat where it meets a distro block and goes into 2 4 awg wires, one feeds the saz 1000d the other feeds the 50.4. Stock alt is 130 amper.. I could do the big 3 but haven't had a need to...

alright in ur best intrest i would go with the two 8s! the box is two small for two 10 expesially after sub dis!

 

[statonburrell 10+ year member]

any more input?