Which distribution block do I need?

[pologuy 10+ year member]

Hi,

If I decide to go with 3 separate amps (1 to power the fronts, 1 for the rears, and 1 for the subs) which distribution block do I need?

1 in 3 out?

3 in 3 out?

I know nothing about this, just need to get all of the supplies for someone else to do the install...

Thanks as always!

Click to read more...

 

[hockey512546 10+ year member]

Well, it depends on how many wires you are running from the battery.

How much power you plan on running?

 

[csu87 10+ year member]

you will need atleast 3 out. 1 for each amp. as for the inputs, it depends on how many runs from the battery you are planning

 

[pologuy 10+ year member]

Well, it depends on how many wires you are running from the battery.How much power you plan on running?

I guess I don't understand your answer.... sorry, I know nothing about this...

I was hoping to run just one wire 0 AWG (?) from the battery to the distribution block - so does that mean i need a 1 in and 3 out?

Not sure if this is what you mean by power, but the amps are:

2 channel amp - 125 W RMS / 200 W Max

4 channel amp - 125 W RMS/ 200 W Max

Monoblock sub amp - 400 W RMS/ not sure what peak is

//content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif

 

[gnatnoop 10+ year member]

http://www.knukonceptz.com/productDetail.cfm?prodID=KNF-23

/thread //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[hockey512546 10+ year member]

Yes, you will be fine with running 0 gauge to the distro

and yes, 1 in 3 out

 

[tc3k101 5,000+ posts]

http://www.knukonceptz.com/productDetail.cfm?prodID=KNF-23
/thread //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

do not get their distro's they **** cack to work with.

 

[pologuy 10+ year member]

Thanks as always!!

 

[gnatnoop 10+ year member]

do not get their distro's they **** cack to work with.

eh, there not that bad. especially if you have the wire and distro out of the car when hooking it up..

 

[pologuy 10+ year member]

So, this one would work?

http://www.sonicelectronix.com/item_10738_Lanzar+OPTIFB1448.html#

And, are these any good? //content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif

Thanks as always!

 

[AlterEgo99 5,000+ posts]

So, this one would work?
http://www.sonicelectronix.com/item_10738_Lanzar+OPTIFB1448.html#

And, are these any good? //content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif

Thanks as always!

Yeah, it's OK but distro blocks with voltmeters built into them are just problems waiting to happen...they can be nice to have but a DMM will work just as well. If you are going to go with a distro block, just go with a plain vanilla one that routes the proper wires, period. IMHO.

 

[BeAlLsTaR13 10+ year member]

http://cgi.ebay.com/KICKER-DB1448-2-IN-4-OUTPUT-DISTRIBUTION-BLOCK-05DB1448_W0QQitemZ360170726700QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item53dbd9252c&_trksid=p3286.c0.m14&_trkparms=65%3A12|66%3A2|39%3A1|72%3A1205|293%3A1|294%3A50

get that one, kicker distro 15.95 shipped.. some people on here want like 20 for them -_-, i bought one... took 2 days to get to me

 

[AlterEgo99 5,000+ posts]

http://cgi.ebay.com/KICKER-DB1448-2-IN-4-OUTPUT-DISTRIBUTION-BLOCK-05DB1448_W0QQitemZ360170726700QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item53dbd9252c&_trksid=p3286.c0.m14&_trkparms=65%3A12|66%3A2|39%3A1|72%3A1205|293%3A1|294%3A50
get that one, kicker distro 15.95 shipped.. some people on here want like 20 for them -_-, i bought one... took 2 days to get to me

There you go...simple...straightforward...and it will get the job done without all the bling! //content.invisioncic.com/y282845/emoticons/cool.gif.3bcaf8f141236c00f8044d07150e34f7.gif