wheel bearing is ****ed...

[Ryan1126]

This is the 3rd time i will have to change my bearings within 2 years, wtf? i recently just went to ORW to have new camber adjusters, upper and lower ball joints replaced, and have new bearings put in like 3 months ago, if that. I paid $800 to have it all done, even though i could have done the bearings myself but im seriously tired of wrenching on this truck. Last night i was just cruising bumping some new mixtape i got and i just start to hear this ****ed up screeching noise from my front left wheel, and my steering wheel was shaking. I am tired of this ****ing truck, should i get rid of it? its a 2000 f150 xlt. It has been nothing but problems.

Click to read more...

 

[fbi90909 5,000+ posts]

just leave it in the driveway unlocked. i'm sure someone wil help you get rid of it.

 

[TurdFergueson2 5,000+ posts]

Sell the truck. Let it be someone else's problem.

 

[treadburner 10+ year member]

do u have over sized rims on it?

 

[Ryan1126]

no, they are 17's

 

[gotparts90 10+ year member]

the bore of the spindle may be out of round or the bearings installed improperly. Bearings from a reputable company are almost never bad and it is from retards torching heating beating and hammering them in that fry them. Or on electrical items arcing that does them in early but that is not applicable here. bearings are cheap just redo it and do it right. check the bore for roundness after this has happened.

 

[Johnny Law.Lulz 5,000+ posts]

the bore of the spindle may be out of round or the bearings installed improperly. Bearings from a reputable company are almost never bad and it is from retards torching heating beating and hammering them in that fry them. Or on electrical items arcing that does them in early but that is not applicable here. bearings are cheap just redo it and do it right. check the bore for roundness after this has happened.

THIS //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[jco1385 5,000+ posts]

the bore of the spindle may be out of round or the bearings installed improperly. Bearings from a reputable company are almost never bad and it is from retards torching heating beating and hammering them in that fry them. Or on electrical items arcing that does them in early but that is not applicable here. bearings are cheap just redo it and do it right. check the bore for roundness after this has happened.

not sure how those are put together, but check the spindle for scarring. metal shavings and dirt will fck shit up with the quickness

 

[Parker G 10+ year member]

balance your tires?

 

[Ryan1126]

well from my lower ball joints beinf ****ed up, it made me rotors warp so everytime ig et on my brakes my wheels get a bad wobble, i think this is what caused it.

 

[AVSTANG02]

I have two large ball bearings in my pants.

 

[Ryan1126]

dick in tha ***, balls in tha *****?

 

[bigbangtheory 5,000+ posts]

Just replaced two of them in my wifes car............for the cheap! I think I paid 100 smacks for both of them installed. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

Granted my dad runs his own shop and I get parts at cost FTW!

For now anyway.......supposed to be getting a new company taking over, so no more win......

Still need to replace the struts and a ball joint and be good to go.....I think. Have dumped over 1400 dollars in this car in two years and just about to be done with it myself, because it is always something else when you get something fixed....

 

[dumple 5,000+ posts]

dick in tha ***, balls in tha *****?

oh my god i havnt heard that in years

tony im fitting to freak this girl

 

[Ryan1126]

Just replaced two of them in my wifes car............for the cheap! I think I paid 100 smacks for both of them installed. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif
Granted my dad runs his own shop and I get parts at cost FTW!

For now anyway.......supposed to be getting a new company taking over, so no more win......

Still need to replace the struts and a ball joint and be good to go.....I think. Have dumped over 1400 dollars in this car in two years and just about to be done with it myself, because it is always something else when you get something fixed....

i payed 8 for this truck and have put roughly $4600 into it. its bullshit.