weight?

[leonsv 10+ year member]

I was just wondering how much would a 1.3 cu ft custom fiberglass enclosure weigh?

Click to read more...

 

[CBFryman2 5,000+ posts]

Depends on how thick you build it.

 

[leonsv 10+ year member]

1/8 to a quarter of an inch

 

[CBFryman2 5,000+ posts]

Probably 15-30lbs depending on shape.

 

[leonsv 10+ year member]

ok so heres a question, would having 60 lbs on one side of the runk affect the handling?, also would having 30lbs on each side be much beter than having 60lb on one side?

 

[CBFryman2 5,000+ posts]

depends. If it is on the passeneger side it could actually help to balence the weight of the drive out a little. And on front heavy cars, weight in the back is generally not a bad thing. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[ultimate157 5,000+ posts]

depends. If it is on the passeneger side it could actually help to balence the weight of the drive out a little. And on front heavy cars, weight in the back is generally not a bad thing. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

what about FWD cars; weight in the back means less traction = //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif

 

[CBFryman2 5,000+ posts]

If you are penis racing.

If you are doing racing which involves some other skill besides shifting and holding the wheel straight neutral balence > a little bit less traction on acceleration.