UPS just dropped off my new 12" AA Assassin

From soundsoulutionsaudio website specs are:

DUAL 4 OHM COILS

Re 7.6 (3.8 Ohms per coil)

Fs 25.7 Hz

Qms 5.50

Qes .38

Qts .35

Mms 121g

Sd 480 cm^2

Vas 104.1 l

SPL 88.6 1W/1m

Bl 20 TM

Xmax 16mm

250W RMS

 
Looks good and I'm sure it'll take more than 250watts of clean power. Old assassin 8's were getting 400 each with no problem.

Going ported or sealed?

 
Gonna seal it up. I'm calculating around a 1.193 cubic ft enclosure. Not sure if thats right but it was what I calculated based on the specs I've got. Running it with a BXI606 so probably gonna be feeding it very close to RMS.

 
Thanks, I plan on it! I stoaked after all the time waiting to have one of these Assassins.//content.invisioncic.com/y282845/emoticons/thumbcool.gif.25d3f515a7f948dd6be51428263071ef.gif

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Like @maylar said, delay the turn on to the amplifier only. 3 to 5 seconds should take care of it.
8
636
It would also be easy to add an equalizer to have individual rca inputs for all of the channels. A decent one can be had for less than $40...
6
553
Any indication that a loose wire may be the issue? I'd start by checking all the +/- connections to see if one has come lose or is starting to...
1
757
Disconnect the RCA's or hi-level input to the JBl amp. turn the system on, If the noise continues, it's a ground or noise issue with the amp.If it...
1
630

About this thread

truthancisco

10+ year member
Member
Thread starter
truthancisco
Joined
Location
Seattle, WA
Start date
Participants
Who Replied
Replies
44
Views
2,810
Last reply date
Last reply from
truthancisco
Screenshot 2024-05-31 182935.png

Doxquzme

    Jun 15, 2024
  • 0
  • 0
Screenshot 2024-05-31 182324.png

Doxquzme

    Jun 15, 2024
  • 0
  • 0

New threads

Top