unfinished amprack and new home for the 12"mag

[Johnny Drama 5,000+ posts]

Goodies //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

+ batt terminal, - batt terminal, several +&- 1/0 ring terminals, and 4 sets of 1 meter knukoncepts Krystal interconnects.

A pic or two or three of the DEX-P9 and mounted Epicenter control knob.

The Mag in its temp home, thanks to ~Magic Man~ for the table saw and time.

another pic of the mag and one of the many dirsto blocks that will need to be moved for the center console project.

Eipcenter and Soundstream D100 on amp rack. The SS is for my A/D/S tweets that are temp installed in the a-pillars. Tweets stick out so I had to add a spacer. They are going to have to be glassed soon. If I dont get another set.

JBL 75.2 for my 4" coustic mids in the kicks and DEQ-P9 on unfinished amp rack

Obvously nothing is finished so all wires arent hidden yet... Still deciding if I am going to run all JBL amps...I have a memphis 1000d and memphis 300 under the driver and passenger seats.

Click to read more...

 

[DaGh0st 5,000+ posts]

hmm.. wheres the memphis amp?

Mabe glass the back wall with amps and ect.

Edit: just reread bottom of your post.

 

[Johnny Drama 5,000+ posts]

hmm.. wheres the memphis amp?
Mabe glass the back wall with amps and ect.

Edit: just reread bottom of your post.

No glass. I am working on the top cover now. once it is finished I will wrap it in a color match vinal and run the wires correctly hidden. Then start on the center console.

 

[2kchevy06civic 5,000+ posts]

omfg the p9 combo is soooooo t3h ***.

 

[Johnny Drama 5,000+ posts]

omfg the p9 combo is soooooo t3h ***.

it is sexy looking //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[2kchevy06civic 5,000+ posts]

what'd you do with the 8053?

 

[Johnny Drama 5,000+ posts]

what'd you do with the 8053?

Traded it plus some cash for the P9

 

[Worlddre 5,000+ posts]

that p9 is teh gheyness //content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif

 

[Chevyaudio 5,000+ posts]

How big is the temp box?

 

[UndercoverPunk 5,000+ posts]

Sweet stuff pookie.

 

[Chevyaudio 5,000+ posts]

Did you loose a some output when you lowered the box size? wasnt your Hax0red together pro box like 1.7 or so.

 

[Johnny Drama 5,000+ posts]

How big is the temp box?

1.2 before driver disp. 1.03 after IIRC

that p9 is teh gheyness //content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif

Jelous?

Sweet stuff pookie.

Donka //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[Johnny Drama 5,000+ posts]

Did you loose a some output when you lowered the box size? wasnt your Hax0red together pro box like 1.7 or so.

Gained output and power handling. Was only getting 600rms in the larger 1.7 box. Now its getting 1100rms with the 1 cube. Hits just as low, and IMO sounds better. The console will be 2@28hz //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[Chevyaudio 5,000+ posts]

That should be nice...Im stepping away from the SQ side of things in my truck now. Going to be moving the RL-ps into the HT, and Probably going for a set of SPL based 10s in a ported box behind the seat. But hurry up and finish this, I want to hear it.

 

[Worlddre 5,000+ posts]

1.2 before driver disp. 1.03 after IIRC


Jelous?

Donka //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

naturally