Two 10's or one 13"

[ballinizme 10+ year member]

I have 2 Kenwood w2511(ported) on planet audio 650.1 amp right now. Should I rid of the two 10's for a focal or jl 13"? I also have heard focal is better than JL is that true? What other setups would be recomended? I listen to mainly rap music.

Click to read more...

 

[mclerico83 5,000+ posts]

what are you hoping to do, get louder etc.

why not one 15

do you plan on upgrading your amp etc

 

[4OZGLOVES 10+ year member]

well ballzinme lol , I would go with 2 10's or 1 15" maybe a couple aq sdc2.5 10's or one sdc2.5 15". 1 15" would also have a little more cone area than 2 10's.

 

[typer12smr145db]

From personal experience i would keep the 10s , get a bigger amp about 1000 rms true power a get horn ported box built. You will move more wind and have the pressure your lookin for.Thats all i have to offer hope everything goes well.

 

[misfit138 5,000+ posts]

lulz

 

[Bumpin' Goalie 10+ year member]

well ballzinme lol , I would go with 2 10's or 1 15" maybe a couple aq sdc2.5 10's or one sdc2.5 15". 1 15" would also have a little more cone area than 2 10's.

To properly power two SDC 10's he'd need to have 1200rms. Which potentially could make him louder with more power by about 3db.

A single 15" would be fine on his current power, but only a tiny increase in surface area. Though still a respectable sub.

 

[misfit138 5,000+ posts]

To properly power two SDC 10's he'd need to have 1200rms. Which potentially could make him louder with more power by about 3db.
A single 15" would be fine on his current power' date=' but only a tiny increase in surface area. Though still a respectable sub.[/quote']

That's cute. The OP has already been given amazing advice. He needs a 1,000 watt monoblock and a horn ported box.

After that, his $45 Kenwoods will be moving wind like a motherfucker...while achieving the pressure he's looking for.

//content.invisioncic.com/y282845/emoticons/fyi.gif.9f1f679348da7204ce960cfc74bca8e0.gif

 

[ballinizme 10+ year member]

Thank all of you guys for suggestions so i will b lookin for either a nice ported 15" or a bigger amp. My only question is that my kenwoods are only 600w rms combine wouldn't 1000w rms be too much?