Two 10" audiobahn immortal

[mrpolo]

I have two of these subs and i was wondering whats the best way to wire the subs for the loudest sound. Each sub has 4 voice coils and is 2ohms. The peak handling is 3000 watts and the rms is 1500. here are the specs for the subs Audiobahn AWIS10P - 10" Subwoofers - Sonic Electronix i

Click to read more...

 

[mrpolo]

On each sub it has four different terminals of positive and negative. I guess for each voice coil I need to know how to wire those properly because a buddy of mine undid all the wires on the sub itself.

 

[KidThump 10+ year member]

You could wire each sub to .5 ohm, 2 ohm, or 8 ohm

I would wire both to 2 ohm and then wire them together for a 1 ohm load.....

And I would get them in a smallish ported box

3-3.5 cubes at 34hz....

Just get about 1500rms for the pair.....

An Audiopipe 1500d would work good.....

 

[SRim23 5,000+ posts]

Subwoofer Wiring Diagrams

 

[KidThump 10+ year member]

Subwoofer Wiring Diagrams

That wouldn't work for him, He has 2 quad 2 ohm subs.....That site only shows how to wire single and dual....

 

[mrpolo]

ok kidthump i like your idea now how do i go about doing it lol

 

[SRim23 5,000+ posts]

That wouldn't work for him, He has 2 quad 2 ohm subs.....That site only shows how to wire single and dual....

to be honest that did slip my mind but he could just select 4 speakers, dual 2 ohm coils. hes wiring 8 voicecoils together right? im assuming it would work out the same.

 

[KidThump 10+ year member]

to be honest that did slip my mind but he could just select 4 speakers, dual 2 ohm coils. hes wiring 8 voicecoils together right? im assuming it would work out the same.

You sir are correct!

Mrpolo, Use the link above, Wire each sub as 2 dual 2 ohm subs to a 2 ohm final load....Then just wire the 2 subs together and it will be a 1 ohm final load which is what most monoblock amps put out their most power at...

 

[mrpolo]

ok thank you all for your help

 

[KidThump 10+ year member]

ok thank you all for your help

Your welcome, make sure you come back to the forum and keep learning

 

[mrpolo]

when i hook it to the amp do i need to put it in the bridged section or just left postive and right negative