**Trunk Worklog** false floor, box, amps, waffle iron :P

yea just get that krylon fusion stuff and spray away.
its got like a glossy finish though, i'd prolly have to sand it :-/

"dad wheres the sand paper?"

"why?"

"Oh just sanding my waffle iron.."

 
WOw! is the toaster going on the other side? I was thinking of making a little bbq for my van. open up the back and grill away //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif.

 
well I have to wire the whole car now, but because of somebody (who will remain nameless) i dont have my wire //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

I have pics I will post when I get back from the gym

 
Day 3 -

Today I put the sub box together, Im not sure if its going to be permanent, i made the box pretty quickly, im jsut going to see how I like the XXX in a smaller box.

heres what it looks like in the trunk:

100_0672.jpg


its about a mm (literally) from hitting the top of the trunk in the back. if you fold down the seats in the cab here's what it looks like, its so tight I couldnt even see light from outside when trying to look through the crack to outside the trunk. prolly hard to tell from this pic, but:

100_0673.jpg


Next I carpeted my amp rack, and installed the fans!

100_0676.jpg


here's a pic of what the amp rack looks like with the box. I didnt anticipate they would be this close, there is enough room even if the sub is at its xmax, but I dont know if I like how it will look, i may have to do something about it.

100_0677.jpg


and just for fun here's the CDT's that will be powered by the JL 300/4:

100_0670.jpg


thanks for looking.

 
very cool, but you should open up that underneath part, and make a storage comparment for some waffle mix, syrup, plastic forks and shizat (cant store milk\butter\eggs tho)

that would be pimp //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

like i said. you should have done a george foreman grill //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

//edit

UH OH - that waffle iron looks like its sloped pretty bad! i hope in real life its level - otherwise your gonna get an assload of batter pouring out the sides all over your carpet! //content.invisioncic.com/y282845/emoticons/uhoh.gif.c07307dd22ee7e63e22fc8e9c614d1fd.gif//content.invisioncic.com/y282845/emoticons/uhoh.gif.c07307dd22ee7e63e22fc8e9c614d1fd.gif//content.invisioncic.com/y282845/emoticons/uhoh.gif.c07307dd22ee7e63e22fc8e9c614d1fd.gif//content.invisioncic.com/y282845/emoticons/uhoh.gif.c07307dd22ee7e63e22fc8e9c614d1fd.gif//content.invisioncic.com/y282845/emoticons/uhoh.gif.c07307dd22ee7e63e22fc8e9c614d1fd.gif

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

I too generally use the factory carpet to make my templates. It's also a good idea to put layer of butyl damping material under the MDF too...
7
776
If the amp is already part of the unit, with the amp built in, you would need a power supply, something like this: Or sell that amp amp and...
2
1K
It will probably change your tuning. I've seen bigger numbers off of much less power from walling at the rear seats, but Terry "trunk king" Brock...
1
1K
Thanks all for your responses! In regards to the dB meter suggestions, I ended up using my Blue Yeti microphone which supposedly can handle up to...
4
1K

About this thread

lotas

10+ year member
CarAudio.com Elite
Thread starter
lotas
Joined
Location
Washington
Start date
Participants
Who Replied
Replies
38
Views
4,530
Last reply date
Last reply from
NJack2AF
Screenshot_20240524_202505_Samsung Internet.jpg

winkychevelle

    May 24, 2024
  • 0
  • 0
Screenshot_20240523-151806.png

1aespinoza

    May 23, 2024
  • 0
  • 0

New threads

Top