Tru 4.65

[Pl8er 5,000+ posts]

So I'm about to bridge my PG 6.5's and I want to be at 120-130 RMS.

My question is if I bridge the rear channels and the front channels, does that bring me to 2-ohms? Or am I at 4-ohms mono? I'm confused.

Click to read more...

 

[Pl8er 5,000+ posts]

Ok, found the manual and it is 4-ohm mono. But that should be 21.9. I'm doing something wrong as I have the DMM set to ~200v and I get 6.4 at max. Am I reading this wrong?

 

[Pl8er 5,000+ posts]

Bump...I"m still messing with this, but can't figure it out. Could use a quick answer here fellas //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[Pl8er 5,000+ posts]

Well I have been talking to myself for awhile and I might as well just type out what I deemed the solution.

On the DMM 2.1 was what I was shooting for. So I set everything to that and now it sounds pretty nice //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif Going to pick up a second set of the RSD65cs just to be safe that they dont' run out ever LOL