Tommyk90 and Spkrman

Sweet!!! I have a thread with my name as the title!!!

FTW!!

Seriously, you could've kept it to PM's, but since you wanted it this way I guess i can't stop you.

I kept it to PM's because i wanted to TRY and make things more civilized and not keep posting in the bullshit threads that always get started up. But since you want to take it to the forums again, i'll go ahead and post in yet another worthless thread.

Your 1500 watt amp does NOT automatically do 1500 watts because the box says so. Unless you have a perfect 1 ohm load at ALL times (which you don't) you're not getting 1500 watts. Then you have to factor in voltage too. Unless you can supply a perfect 14.4 volts at all times, you're not going to get that power.

/story

And packerfan, STFU already.

 
Thnx! //content.invisioncic.com/y282845/emoticons/eek.gif.771b7a90cf45cabdc554ff1121c21c4a.gif
There is nothing about subs there, the link doesn't work.

You are a poop head.
The link works. It takes you to a google page where you can plainly see the decware homepage address in the results. //content.invisioncic.com/y282845/emoticons/crazy.gif.c13912c32de98515d3142759a824dae7.gif
 
The link works. It takes you to a google page where you can plainly see the decware homepage address in the results. //content.invisioncic.com/y282845/emoticons/crazy.gif.c13912c32de98515d3142759a824dae7.gif
Oh, thanx actually, that webiste is awesome, I just found some foam rings for my Seeburg 12" speakers! Now I just need a silk dome tweeter and a horn driver...

 
You must really think I'm stupid don't you?? Just because the box says 1500 watts means it will do it?? LOL....man that's the lamest remark I've ever heard. In order to achieve that 1500 watts....into 2 ohms, not 1, the engine must be running along with a strong electrical system. Period. Interesting to see well above 1500 watts by some people that have the same amp actually pull off 1700 watts give or take a few and thats at full power. But yet you say that'll never happen.
well, technically your wrong......

you would either need to test it on the bench w/ a resistor

chances are, you would wire it to 1ohm nominal and and still be well above 2ohm in box;)

 
You must really think I'm stupid don't you?? Just because the box says 1500 watts means it will do it?? LOL....man that's the lamest remark I've ever heard. In order to achieve that 1500 watts....into 2 ohms, not 1, the engine must be running along with a strong electrical system. Period. Interesting to see well above 1500 watts by some people that have the same amp actually pull off 1700 watts give or take a few and thats at full power. But yet you say that'll never happen.
Unless you magically made a box that has ZERO impedence rise, you are NOT getting a 1 ohm load, and could be rising up to who knows what.

I had a "1 ohm" load in one of my setups, set it up on a DMM and a clamp meter and found that i was rising up to 6 ohms. So while i should have theoretically been getting 3000+ out of a pair of nine.1's at .5 ohm a piece, i was actually getting 550 out of the PAIR.

So until you get it on a DMM and clamp meter, you cannot make any claims as to what power you are getting.

 
Maybe you should take your own advice, shove it up your ***...and while you up there get your head out of it also, and remove your foot from your mouth...k? That might help with all the bullshit thats coming out of it....
You talk all this stuff to me over AIM about not posting in threads simply to avoid b.s., even when i have experience in the situation......

You dont have experience in ANY of this stuff, and you're telling me to shut up.

I got an idea, how about you never post in any thread that you don't have first hand experience in, and avoid your bullshit posts all together.

You act like i'm the hypocritical one here, well how about you practice what you preach and not post in this thread ever again. You have no right to post here anyways. So go f*ck yourself.

 
*waits for pm's to be posted*
who does 150's at 35hz????? who does that?
actually the blazer did it with the pair of R 12's too, with the 2500d at 1 ohm, 153.0 on the dash at 36hz.

153.5 at the headrest @ 36hz, did 153.3 at meca finals... running on a 50 amp fuse.

151.0 at 28hz in the kick, never tried it on the dash.

Also pulled a 151.1 on the dash at 38hz today in the blazer... with one R 15 and the orion at 1 ohm. I have some vids of this one and that box will be in the for sale section shortly.

Theorys FTW!









//content.invisioncic.com/y282845/emoticons/rolleyes.gif.c1fef805e9d1464d377451cd5bc18bfb.gif
if I would have went the other way it would have been a theory.

3db LOSS with half the power... thats called generous. I wasn't bragging, I was proving a point. Someone that is 10+db quieter says they don't have the big 2500 watt amp... only 800. Well, I just had to set some misconceptions straight.

You must really think I'm stupid don't you?? Just because the box says 1500 watts means it will do it?? LOL....man that's the lamest remark I've ever heard. In order to achieve that 1500 watts....into 2 ohms, not 1, the engine must be running along with a strong electrical system. Period. Interesting to see well above 1500 watts by some people that have the same amp actually pull off 1700 watts give or take a few and thats at full power. But yet you say that'll never happen.
not under your conditions, which is what the PM was about //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif. Once again, just a reality check.

You talk all this stuff to me over AIM about not posting in threads simply to avoid b.s., even when i have experience in the situation......
You dont have experience in ANY of this stuff, and you're telling me to shut up.

I got an idea, how about you never post in any thread that you don't have first hand experience in, and avoid your bullshit posts all together.

You act like i'm the hypocritical one here, well how about you practice what you preach and not post in this thread ever again. You have no right to post here anyways. So go f*ck yourself.
Post where you have experience, what a concept? I though that was called being helpful?

Nah... buy these woofers Ive never seen/heard because they are big and shiny //content.invisioncic.com/y282845/emoticons/naughty.gif.94359f346c0f1259df8038d60b41863e.gif . Don't buy those woofers I have never seen/heard because I dont like "insert brand here".

You see me in type R threads because I have extensive experience with them. You DONT see me in MTX threads because I have honestly not used any of their products... other than the 81000, and the 1501d. And what do you know, the 81000 pops up and I post my experience with it.

Sorry for having real world experience?

Please stop pm me with your top notch knowledge. If you both are so smart and have all this knowledge, I dunno why an audio manufacturer won't hire you. I do with what stuff I have and what SPL meter is near me. I could careless what systems you guys have had customers had and "hit 150 with 1 10 and only 550 watts"....good for you. Do I really care?? No. So please, end it now.
I took it to PM because whatever thread we were in was locked. You were pushing your 146 with the 2 JL 15's on the oddball meter as if it was an extremely respectable score... I just wanted to put things into perspective. You were pushing your 140 on the epic with the 4 10's as "it'll be so much louder with more power", and said you didnt have those box 2500 watt amps to work with.. and again, wanted to put things into perspective.

Sorry to burst your bubble.

As far as an audio manufacturer, huh? Check the sig //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 
You talk all this stuff to me over AIM about not posting in threads simply to avoid b.s., even when i have experience in the situation......
You dont have experience in ANY of this stuff, and you're telling me to shut up.

I got an idea, how about you never post in any thread that you don't have first hand experience in, and avoid your bullshit posts all together.

You act like i'm the hypocritical one here, well how about you practice what you preach and not post in this thread ever again. You have no right to post here anyways. So go f*ck yourself.
YOU dont know what i have expierence with so your judgment on me is null and void.

You called me out so i will post and i have every god **** right to post in what ever thread i want, including this one. So dont whine and complain like the little ***** you are when somone posts a retort back....

See ya at the grove, *****....

 
Activity
No one is currently typing a reply...

About this thread

btnhfan

5,000+ posts
Hail to the King Baby!!!!
Thread starter
btnhfan
Joined
Location
CT/ GA Tech, Atlanta
Start date
Participants
Who Replied
Replies
119
Views
1,085
Last reply date
Last reply from
Silver
IMG_20260506_140749.jpg

74eldiablo

    May 22, 2026
  • 0
  • 0
design.jpeg

WNCTracker

    May 22, 2026
  • 0
  • 0

New threads

Top