Strongly considering redoing the box and subs in my Polaris Side by Side.
Looking for suggestions, tips, etc on how to make the most of it considering the limitations. It's open air, meaning there is no trunk or even a sealed off cabin. What is typically the best option for a box in a vehicle that doesn't seal up?
Subs typically go in the truck bed, strapped down. Currently I have 3 Type-R 8's in Alpine's suggested ported box, subs and port facing forward, a few inches from the front bed wall. Works pretty **** well but I know there is potential for more.
Current box is ~2.2 cu ft NET. Could probably get 3 cu ft NET without giving up space for the beer cooler in the bed.
For those that don't know what a side by side is, here's a picture of a stock one
Looking for suggestions, tips, etc on how to make the most of it considering the limitations. It's open air, meaning there is no trunk or even a sealed off cabin. What is typically the best option for a box in a vehicle that doesn't seal up?
Subs typically go in the truck bed, strapped down. Currently I have 3 Type-R 8's in Alpine's suggested ported box, subs and port facing forward, a few inches from the front bed wall. Works pretty **** well but I know there is potential for more.
Current box is ~2.2 cu ft NET. Could probably get 3 cu ft NET without giving up space for the beer cooler in the bed.
For those that don't know what a side by side is, here's a picture of a stock one
