Livewire-Eric 10+ year member
Junior Member
I'm not completely finished yet, but I wanted to fill you guys in on my testing so far. I started with an actual 4 ohm load (a dual 2 ohm sub with coils in series). Just so that the results are clean usable power, I always back the volume down at least a few tenths of a decibal. In this test the amp made 244.3 watts at 8.7 ohms (8 tenths down from the maximum score). That was 46.1 volts, 5.3 amps, 8.7 ohm reactive load.