Im building a floor with four cubes for a single fifteen that was sold to me by teamquakecelica. Im trying to figure up a tune of about 27hz, can you help me out? THe specs are below. Im looking at doing a square port through the rear speaker holes.
Specs for the 15" Model as well:
Revc = 4.0229 ohms
Fms = 27.3089 Hz
Zmax = 38.5442 ohms
Qes = 0.3948
Qms = 3.3876
Qts = 0.3536
Le = 4.0277 mH (at 1 kHz)
Diam = 325.7550 mm ( 12.8250 in )
Sd =83343.5655 mm^2(129.1828 in^2)
Vas = 152.9121 L ( 5.4000 ft^3)
BL = 19.5766 N/A
Mms = 219.1788 g
Cms = 154.9648 uM/N
Kms = 6453.0791 N/M
Rms = 11.1017 R mechanical
Efficiency = 0.7412 %
Sensitivity= 90.7176 dB @1W/1m
Sensitivity= 93.7030 dB @2.83Vrms/1m
