tc sounds tc-1000 8" same as rl-i 8?

[loud-n-low 10+ year member]

basically asking if these are identical,would there be an advantage to get them from one or the other? besides the rl-i 8 being prettier:naughty:

Click to read more...

 

[JoeHemi57 10+ year member]

service goes to soundsplinter but TC offers single and dual 4 ohm and they are claiming 4mm more xmax.

 

[loud-n-low 10+ year member]

arent the rl-i 8's available in both single4 and dual 4?

 

[JoeHemi57 10+ year member]

looks that way, about a month ago i think i only saw D4's.

 

[adio 5,000+ posts]

if thats the case, are TC-2000's and rl-p's identical??

 

[denim 5,000+ posts]

they are similar but not exactly the same

 

[CBFryman2 5,000+ posts]

T/S Parameter Comparison:

Rl-i Dual 4

Qts: 0.280

Qes: 0.316

Qms: 2.515

Fs: 28.9 Hz

Re: 7.4

Ls: 2.961 mH

Lp: 4.383 mH

Rp: 4.777

Dia:

(% shift) 160 m

47.9 %

Vas: 21.98 L

Mms: 77.97 g

Cms: 387.1 u

Bl: 18.24 T*m

n0: 162.7 m

SPL: 84.11 dB

Sd: 0.020 m^2

RMS: 300 watts

Xmax: 18.3 mm

TC-1000 D4

Qts 0.332

Qes 0.382

Qms 2.55

Fs 25hz

Res 8.10Ω

Ls 3.02mH

Lp 3.10mH

Rp 4.38Ω

Dia 160mm

Vas 17.9l

mms 98g

cms 316m/N

bl 21T*m

Spl 81.2dB

You tell me. Different Qts, Fs, Re, SPL, mms, Vas...

They are bassed off of the TC 2+ platform, hwoever hte softparts are completely different. The TC-1000 opted for more linear displacement and sacraficed a little efficency. Different spiders and different compliances.

Not MAJOR differences but they are different.

 

[bamaboy 5,000+ posts]

RLi is TC2+ and Rl-P is TC9 motor, RLS uses the LMT stuff

SS needs a 3hp motor now //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[adio 5,000+ posts]

RLi is TC2+ and Rl-P is TC9 motor, RLS uses the LMT stuff
SS needs a 3hp motor now //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

http://www.caraudio.com/forum/showpost.php?p=2018252&postcount=1

see ques #5

 

[denim 5,000+ posts]

RLi is TC2+ and Rl-P is TC9 motor, RLS uses the LMT stuff
SS needs a 3hp motor now //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

That is a good idea!