TC sounds project and extra parts

[bumpin buick 5,000+ posts]

Item(s) for Sale:

(1) TC Sounds 3hp+ (LMS4000) motor

(2) TI PRO 15" silver baskets

(4) 9.75" medium stiffness spiders

(2) LMS S3 coils.

(2) DD 9515F based cones

(3) Female 3" QCA rings

(4) Male 3" QCA rings

Item(s) Description/Condition:

Motor has no chips or cracks and cleaned up nicely but does not have a motor boot included

Baskets will be cleaned on a mill before shipped

Coils, spiders, cones are all brand new

QCAs include all mounting hardware

Price:

Motor: $250

Baskets:$125 each

Spiders: $15 each

Coils: $40 each

Cones: $25 each

QCAs: $200 for all five parts

or $700 for everything, pretty much get free softparts when you get the baskets, motor, QCAs. There are a few of these motors out there right now all youd need is one and you have two amazing custom 15"s.

Shipping not included but I have a shipping business account so shipping is very reasonable.

Shipping and Miscellaneous Item Information:

Item Pictures:

(List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)).

Click to read more...

 

[SPY 5,000+ posts]

former height on the coils?

 

[bumpin buick 5,000+ posts]

former height on the coils?

Just under 5" but I had John at Precision make me custom former extensions. It brings these to over 7" so they work fine in any TI basket and be cut down to any size I can put pictures up of them in use tomorrow if its of interest. I also had several non lms coils made specifically for the TI baskets as well. They are also over 6" high formers as well.

 

[SPY 5,000+ posts]

I'm interested in the 2 LMS coils and probably 2 other coils tall enough to work in Ti baskets. D2's if you've got them.

PM me more info and ID, OD and WH on both if you can.

 

[my_stealth21 10+ year member]

I will take one male and one female qca I'm pming u now

 

[my_stealth21 10+ year member]

Do u have any non lms that would be good in a tc9 motor?

 

[PioneerSPL1990 10+ year member]

trade ya a pair of unused 18" mmats juggernauts for the parts to build one and the motor.

 

[bumpin buick 5,000+ posts]

sorry no interest in trades at this time. It was a project for a fellow member and he needs it sold.

 

[bumpin buick 5,000+ posts]

Former extensions

 

[Audiohazzard 10+ year member]

What's the spider sizes do you have? Please PM me I looking for two stiff spiders I'll get the size I need.

 

[Rayo 10+ year member]

What's the height on those cones?

 

[bumpin buick 5,000+ posts]

What's the spider sizes do you have? Please PM me I looking for two stiff spiders I'll get the size I need.

The ones listed are for TI baskets and are 9.75" I also have some as large as 12" and as small as 6" let me know what you need.

What's the height on those cones?

They are not cut for 3" coils so that will reduce height then they get cut down. do you want surround height as well or just bottom of cone to top of cone lip?

 

[Rayo 10+ year member]

The ones listed are for TI baskets and are 9.75" I also have some as large as 12" and as small as 6" let me know what you need.
They are not cut for 3" coils so that will reduce height then they get cut down. do you want surround height as well or just bottom of cone to top of cone lip?

Just bottom of cone to top of cone lip..Thanks..

 

[canadian-nowall 10+ year member]

Any chance you have extensions for 4" coils? if so, could you pm a price.....if not, help ordering some please?!!

 

[bumpin buick 5,000+ posts]

Any chance you have extensions for 4" coils? if so, could you pm a price.....if not, help ordering some please?!!

I do not have those, they would have to be a custom order which means design/setup fee, and a minimum order would need to be placed. I can direct you but at this point, may be better off having new coils made with 6"+ formers.

Just bottom of cone to top of cone lip..Thanks..

3.5"