TC Sounds 12" TC1000's

[Trancer 10+ year member]

Item(s) for Sale: I have two TC Sounds TC1000's with the TC2+ motors. I believe they were rated either 500 or 600 watts rms. I cant remember for sure.

Item(s) Description/Condition:

They are both blown, but Thilo has the parts to repair them. One has a 4 spoke basket and the other has a 12 spoke basket. Was planning on using them for my home theater project, but unsuspected finance came up, so I may have to part with one or the both of them. //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif I really wanted two of these 12's in my house since they are absolutely great for HT and car systems

Price:

$80 shipped each

Shipping and Miscellaneous Item Information:

Prices are with shipping.

Item Pictures:

View attachment 26523424View attachment 26523425View attachment 26523426View attachment 26523427

(List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)).

Click to read more...

 

[Bettr n' Revrse 5,000+ posts]

Seem pretty nice...

 

[Trancer 10+ year member]

Thank you. They are indeed. I really dont want to get rid of them. But I havent even started on my box build with a plate amp or even send the subs off to get re-conned. They need a good home. Someone who will take good care of these.

 

[Bettr n' Revrse 5,000+ posts]

Seeing if I can do something with.....

 

[Trancer 10+ year member]

If they happen to go to you, the it would make me feel alot better about it. I dont want them to go to some Noob

 

[Bettr n' Revrse 5,000+ posts]

Hahaha well I have a lot to learn but I will put them to good use for sure! You said 500 rms originally?

 

[Trancer 10+ year member]

either 500 rms or 600 rms. Ill have to check. The TC2+ motors dont need much power to reach xmax.

 

[Bettr n' Revrse 5,000+ posts]

Wonder how much they can be built to handle.....

 

[Trancer 10+ year member]

Ok, maybe its 400wrms. I was running both of these on my JBL BP1200.1 which does around 1400 watts. I ran it like that for 3 years, no problems. Problem: Blew the subs when the screws in my downfiring box came loose. Let my cousin borrow my truck for the weekend, I forgot to put the new wood screws in. He turned the stereo up and poof.

Specifications

What makes the TC-1000 The New Standard entry driver that practically blows away what the retail competition offers at twice the price? Find out why the TC-1000 is the leader is high output below 200 dollars and still embarrasses whimpy SQ drivers time and time again which can't match the TC-1000's distortion vs. SPL performance...

Advanced FEA Motor System

- Double stacked 1" tall ferrite magnets and bored T-yoke for long throw

- 135oz top grade magnet structure

- Anti-flux modulation copper shorting ring to lower distortion

- Low carbon steel used for the gap plate and t-yoke

- Pole vent for lower distortion and cooling capabilities.

Advanced high excursion soft part system

- High excursion 8.0" linear roll poly-cotton spider

- Integrated woven leads to prevent lead-slap

- 2" diameter, 4-layer aluminum wire voice coil with an anodized aluminum former

- Single or dual 3.7ohm (4 ohm nominal) voice coil configuration

- Lightweight brushed and powder coated aluminum cone

- 1" wide long throw, highly durable NBR surround

- High quality thermal flexible epoxies to ensure longevity

Performance

- Effective motor force of 60 Newtons2 per watt (BL2/Re)

- 400 watts continuous power (1200 watts peak)

- 24mm BL XMax (voice coil, one-way)

- 37mm XMech (mechanically limited, one-way)

12" TC-1000

Qts 0.282

Qes 0.305

Qms 3.780

Fs 19hz

Res 3.70?

Ls 2.38mH

Lp 3.51mH

Rp 2.99?

Dia 240mm

Vas 132l

mms 153g

cms 460um/N

bl 15.4T*m

Spl 86.9dB

 

[Trancer 10+ year member]

Wonder how much they can be built to handle.....

I believe from talking to Thilo, he said they can be built for higher power handling, but nothing extreme since they are the TC2+ motor.

XBL2

 

[Bettr n' Revrse 5,000+ posts]

I was thinkin around the 1000 mark

 

[Trancer 10+ year member]

Here is Thilo's email address. He's a great guy. He has been all over the world last time I spoke with him and he was emailing me back from the whole other side of the hemisphere. Emailing me from a new country every time.

Thlio Stompler: tstomp@gmail.com

He gave me a cost of $90 to recone each sub.

 

[Trancer 10+ year member]

Shoot him over an email and see if it can be done.

 

[Bettr n' Revrse 5,000+ posts]

He builds subs Im guessing then?

 

[Trancer 10+ year member]

He's the engineer over at TC Sounds