TC Bankrupt..

[mrogowski 5,000+ posts]

Hell, wtf.... now would be a neat time to show one of my TC sounds 5200 tests on here... Its never been released to the public. But since TC Sounds is now DOA, what does it matter ? Its an old design anyways, and there has been a couple of copies of it floating around.

As far as I know. They are looking for a sealed bid to take all however, so I doubt the stuff will be split up. Hard to say though... They may even sell it by the pallet load.

 

[audioholic 5,000+ posts]

Hell, wtf.... now would be a neat time to show one of my TC sounds 5200 tests on here... Its never been released to the public. But since TC Sounds is now DOA, what does it matter ? Its an old design anyways, and there has been a couple of copies of it floating around.

Did the cone fail, or did the t-joint? If the joint came loose and smacked the former up and down against the cone, the cone would surely deform/break. That wouldn't be the cone's fault, but the t-joint's fault instead.
Just thinking aloud.

 

[joetama 5,000+ posts]

Hell, wtf.... now would be a neat time to show one of my TC sounds 5200 tests on here... Its never been released to the public. But since TC Sounds is now DOA, what does it matter ? Its an old design anyways, and there has been a couple of copies of it floating around.

Like a Sprite Can... //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif//content.invisioncic.com/y282845/emoticons/crazy.gif.c13912c32de98515d3142759a824dae7.gif//content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif//content.invisioncic.com/y282845/emoticons/wow.gif.23d729408e9177caa2a0ed6a2ba6588e.gif:wow:

 

[loudmofo 5,000+ posts]

//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[snoopdan 5,000+ posts]

Did the cone fail, or did the t-joint? If the joint came loose and smacked the former up and down against the cone, the cone would surely deform/break. That wouldn't be the cone's fault, but the t-joint's fault instead.

It was the t-joint that failed and slammed into the cone during this particular episode. They only put two thin, wimpy spiders on this top assembly (which I begged them to not go to production with, to no avail) //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif

Like a Sprite Can... //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif//content.invisioncic.com/y282845/emoticons/crazy.gif.c13912c32de98515d3142759a824dae7.gif//content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif//content.invisioncic.com/y282845/emoticons/wow.gif.23d729408e9177caa2a0ed6a2ba6588e.gif:wow:

hmmm, wonder how it got coined "sprite can" all that time ago //content.invisioncic.com/y282845/emoticons/uhoh.gif.c07307dd22ee7e63e22fc8e9c614d1fd.gif

 

[audioholic 5,000+ posts]

1st mod to get back to me and have this and a few trends deleted gets $50 no bs pm me

//content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif//content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif
When you present no other information, this appears as nothing more than an attempt at a bribe. Im sure you'd not like to give such an appearance.

 

[lilmaniac2 5,000+ posts]

It was the t-joint that failed and slammed into the cone during this particular episode. They only put two thin, wimpy spiders on this top assembly (which I begged them to not go to production with, to no avail) //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif



hmmm, wonder how it got coined "sprite can" all that time ago //content.invisioncic.com/y282845/emoticons/uhoh.gif.c07307dd22ee7e63e22fc8e9c614d1fd.gif

could it be from my infamouse photoshop that got me a pm from the man himself, kyle lawl

 

[loudmofo 5,000+ posts]

//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[audioholic 5,000+ posts]

It was the t-joint that failed and slammed into the cone during this particular episode. They only put two thin, wimpy spiders on this top assembly (which I begged them to not go to production with, to no avail) //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif



hmmm, wonder how it got coined "sprite can" all that time ago //content.invisioncic.com/y282845/emoticons/uhoh.gif.c07307dd22ee7e63e22fc8e9c614d1fd.gif

That makes sense. But then, why is the cone what seems to be getting the negative press if it was the joint's fault?

 

[joetama 5,000+ posts]

It was the t-joint that failed and slammed into the cone during this particular episode. They only put two thin, wimpy spiders on this top assembly (which I begged them to not go to production with, to no avail) //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif



hmmm, wonder how it got coined "sprite can" all that time ago //content.invisioncic.com/y282845/emoticons/uhoh.gif.c07307dd22ee7e63e22fc8e9c614d1fd.gif

Yea... Well I guess that happens...

Is that cone made in France? Because it folds quickly under pressure. //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

I figured I would reignite the old sprite can thing... Haven't seen it in a while...

 

[duece212 5,000+ posts]

could it be from my infamouse photoshop that got me a pm from the man himself, kyle lawl

wasn't that from cones ripping at the surround?

And congrats on gettin the man on your *** //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

 

[snoopdan 5,000+ posts]

could it be from my infamouse photoshop that got me a pm from the man himself, kyle lawl

//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif we've all had many chuckles at his expense. I actually admire him for his dedication to TC even though they canned him.

 

[audioholic 5,000+ posts]

theres a reason that i will tell the mod no problem doing it i have my reasons had to do with buying a paten //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

If you have a valid reason to have this or any other thread deleted, paying off the admin to do so would not be necessary. offering $50 only indicates you do not have any valid reason to have these posts removed.

 

[loudmofo 5,000+ posts]

if you want pm me ill tell you

 

[snoopdan 5,000+ posts]

That makes sense. But then, why is the cone what seems to be getting the negative press if it was the joint's fault?

Actually those problems with the surrounds were totally unrelated to the failure of the t-joints.