Sold TC-9/Eclipse 12" D4, Pioneer GM-X722, Raytek Thermal Sensor

[ciaonzo 5,000+ posts]

TC built Eclipse SW8122DVC, TC-9 with a single 1.5" slug rather than two .75" slugs. Removable top assembly for the oohs and ahhs. Excellent SQ driver with prodigious amounts of output. Sounds great whether you have 250 watts or 1000 watts. 2.5" stroke. Flawless condition.

$150 plus shipping.

No, this is not a 2 kilowatt power station, but it is a seriously underrated and under-appreciated bundle of class A/B high current SQ goodness. Low THD and high S/N. Fan cooled, stable to 1ohm stereo/2ohm mono. This amplifier can deliver about 500 watts and sounds wonderful doing it.

$75 plus shipping.

Ever wanted to know exactly how hot your amplifiers are running? Or anything else for that matter? This will tell you just by pointing and shooting. It measures infrared wavelengths and gives you a temperature readout. I used to calibrate these when I was in the military and they are very accurate. Technology has advance quite a bit since this version was introduced and what used to cost about $1400 can now be bought for as little as about $100. Feel free to ask any questions about this.

$65 shipped.

As always, I take care of PayPal fees. Thanks guys.

Click to read more...

 

[tc3k101 5,000+ posts]

aww man i want that eclipse but im broke as a joke. glws

 

[Twisted_0912 10+ year member]

nice stuff glws

 

[ciaonzo 5,000+ posts]

Thanks fellas!

 

[orangelss 10+ year member]

Nice Pioneer. They are diffinatly a under appreciated line.

Oh plan on setting up the rotary table Wed or Thursday so will get you spider spacers cut than. If you can hit me up one last time with the diminsions. I keep emptying my PM's and losing yours.

 

[ciaonzo 5,000+ posts]

Nice Pioneer. They are diffinatly a under appreciated line.Oh plan on setting up the rotary table Wed or Thursday so will get you spider spacers cut than. If you can hit me up one last time with the diminsions. I keep emptying my PM's and losing yours.

Sweetness.

I'll shoot you the dimensions in a PM marked "DO NOT DELETE". //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

Thanks orange.

 

[ciaonzo 5,000+ posts]

Good morning. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[ciaonzo 5,000+ posts]

I failed to mention that I have the original packaging for the Eclipse.

 

[nismos14 5,000+ posts]

Can the ecl be used ported? If so, specs on a box?

 

[ciaonzo 5,000+ posts]

Can the ecl be used ported? If so, specs on a box?

If you use the coils in parallel the Qts is mellow and it models wonderfully in 1.5cu.ft @ 28hz.

If you use the coils seperately the Qts is in the .57 neighborhood and would sound best in a sealed enclosure of the same size.

It should go without saying that this is power dependent.

 

[ciaonzo 5,000+ posts]

If you want it to get really nasty in the subsonic range with full power handling you can stick it in 2cu.ft. @ 22hz. //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[ciaonzo 5,000+ posts]

Bump for the after work crowd.

 

[ciaonzo 5,000+ posts]

Beef. It's what's for dinner.

 

[orangelss 10+ year member]

Ruben sandwiches here. Bump for you^

 

[ciaonzo 5,000+ posts]

Thanks orange. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

I have too many TC drivers. Please make good use of this one for me!