suggestions 4 88 civic

Hmm, maybe tune lower ( CRXs usually are tuned higher... as of my knowledge - might be wrong )

... More port area ( bigger port.... different style port )

Instead of L shape, slot, square... use a 6" - 8" circle .....

... just don't limit yourself, or get disappointed cause it didnt do what it did before.

Just cause it hit a 151 in that car, don't mean it'll be the same in another. ( The bug could have peaked @ at 49 ... this car might peak @ 54...

 
ya i know i have 5 4" psp ports now but think i'll go with a slot port tuned to around 37hz sub and port up box will be 33x37.5x16.75 outside dimentions will start building this afternoon unless someone knows that haveing the subs forward gives a better reading on the mic. Thanks for the help everyone

 
Well... make it like this!

* My story *

I had the Superbass ported probox for 12s facing the trunk - 139.6 ( Nissan Sentra )

I turned the box around, facing the cabin - 140.7 ( Nissan Sentra )

Bought the Superbass ported probox for L7s ( Modded it for circles - facing the trunk ) - 142.3

I turned the box around, facing the cabin - 144.2

* both were tuned @ ~50hz ... Same style box, just different size *

... Well, I finally built a box - Instead of the port right down the middle, port is on the side, subs facing the trunk. Tuned @ ~48.39 - 146.5

Point - You just gotta play around.

.... I put this setup in my honda ( 146.9 ). and then in my 4 runner ( 145.8 ) * And I thought it was gonna be louder in the SUV... sike

 
this is what mcbuggin has right now..............

first question...

8 cu ft net, supposed to have 128 sq inches of port area...

have a 136 inches of port area, is that too mutch

3 8'' areo ports

looking to tune it to 37 hz...

sub's forward, port's back.

in a 88 honda civic hatchback

two 15'' AQ hdc3's

wanting more allong the spl.

secound question...

allso in a 88 civic hatchback, goal here is pure spl.

what do you think the box design should be?

port's forward, out the rear? up?

sub's up, back, forward??

 
IMO - Question 1: More port area....

IMO - Question 2: You won't know until you do each one with each one....

* subs forward - port up/forward/back/side

* subs up - port up/forward/back/side

* subs back - port up/forward/back side

** I've seen this ** subs side - port foward/back

Draw each one up...

... See which one you like the most

Post pictures, ask for comments on design

... Take whatever comments or advice ( only yours really counts )

Then apply

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

mcbuggin

10+ year member
CarAudio.com Elite
Thread starter
mcbuggin
Joined
Location
smithfield,UT.
Start date
Participants
Who Replied
Replies
15
Views
908
Last reply date
Last reply from
NissanKicker
IMG_1882.jpeg

slater

    Oct 4, 2025
  • 0
  • 0
Screenshot_20251004_120904_Photo Translator.jpg

1aespinoza

    Oct 4, 2025
  • 0
  • 0

New threads

Top