SPL FX2-2600 is it enough

[HOGHUNTERS 10+ year member]

will this amp be sufficient to push 2 12" P.G. XENON'S if i run them at 2ohm

http://www.sonicelectronix.com/item_9171_SPL+FX2-2600.html

Click to read more...

 

[terra 5,000+ posts]

I used to have one of those...meh.

 

[HOGHUNTERS 10+ year member]

does that mean stay away or ?

 

[n2audio 5,000+ posts]

dvc 4's?

That amp should do around 900w bridged into 4 ohms. You're not going to squeak every last 0.1dB out of them, but it should be more than enough for them to sound good.

 

[HOGHUNTERS 10+ year member]

i beleive there dvc2 but not 100% sure .. but thanks

 

[bigbangtheory 5,000+ posts]

Should be fine for those subs.

 

[n2audio 5,000+ posts]

you won't get as much power with dvc 2's. You would have to wire them at 4 ohms stereo/8 ohms mono.

The good news is the SPL amps don't increase much in power when running at lower impedance, so instead of 1080 (rated) at 4 ohms bridged you'll get 900 at 8 ohms bridged.

Realistically you're probably going from about 900 to 700-800.

Not a huge difference. Still plenty for the PG's.

 

[HOGHUNTERS 10+ year member]

thanks for the help appreciated