Item(s) for Sale:
Sony XM-250
Item(s) Description/Condition: used but good condition, amp was tested today and works great
Specs - These are not powerhouses but they are very well built with large copper bus bars, quality caps, and big Sanken output devices. Built in Japan, very clean sound and very reliable performance.
XM-250
2 x 50 RMS @ 4 ohm (2 x 100 dynamic) THD 0.04%
2 x 65 RMS @ 2 ohm (2 x 130 dynamic)
1 x 130 RMS @ 4 ohm (1 x 260 dynamic)
High pass filter fixed at 80Hz 12dB slope.
Low pass filter fixed at 80Hz 18dB slope.
Can be fully bypassed to run full range.
10.3V to 16V power input.
.2V to 2V input sensitivity.
Price: $60 shipped to your door
Item Pictures:
(List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)).
Sony XM-250
Item(s) Description/Condition: used but good condition, amp was tested today and works great
Specs - These are not powerhouses but they are very well built with large copper bus bars, quality caps, and big Sanken output devices. Built in Japan, very clean sound and very reliable performance.
XM-250
2 x 50 RMS @ 4 ohm (2 x 100 dynamic) THD 0.04%
2 x 65 RMS @ 2 ohm (2 x 130 dynamic)
1 x 130 RMS @ 4 ohm (1 x 260 dynamic)
High pass filter fixed at 80Hz 12dB slope.
Low pass filter fixed at 80Hz 18dB slope.
Can be fully bypassed to run full range.
10.3V to 16V power input.
.2V to 2V input sensitivity.
Price: $60 shipped to your door
Item Pictures:
(List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)).
