Some bench test numbers

[GoochJuice]

not sure if this has been posted here before, but i figured some would get a kick out of it. very limited amounts of amps but eh, i figure its better than nothing. BTW, no i did not highlight the Z2 amp, thats just the way i found the picture.

Click to read more...

 

[terra 5,000+ posts]

caidens? hmm try cadence

 

[GoochJuice]

caidens? hmm try cadence

i know i saw that. even spelled the name two different ways, and both are wrong lol. eh, not my picture, or test so //content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif

 

[terra 5,000+ posts]

its all good

 

[mile098 10+ year member]

happen to have numbers for rf bd 1000.1?

 

[GoochJuice]

happen to have numbers for rf bd 1000.1?

nope, what you see is what you get.

like i said they are not mine, i just found it online and decided to pass it along.

 

[Skip01 5,000+ posts]

this is on the soundpressure forum

 

[GoochJuice]

this is on the soundpressure forum

correct. found it when i searched "atomic 7000.1 bench test" on google.

 

[18inchjeepin 10+ year member]

This is very interesting Thanks!

 

[OldSchoolBass-G 10+ year member]

****!!!them **** orions were holdin it Down for some old school amps!!!

 

[lilmaniac2 5,000+ posts]

take into account that the test was done by people close to dd //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[02parkave 5,000+ posts]

take into account that the test was done by people close to dd //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

i would trust there numbers as much as i would trust yours. (or anyone elses, for that matter)

 

[vehementSPL 10+ year member]

I call BS on the memphis 1000d. We tested it wired ohm can't remember exact imp rise but was for sure under 2 ohms. like 1.5 I think and was getting 1050 watts at 13.8. Which is still **** good for that amp

 

[Skip01 5,000+ posts]

I call BS on the memphis 1000d. We tested it wired ohm can't remember exact imp rise but was for sure under 2 ohms. like 1.5 I think and was getting 1050 watts at 13.8. Which is still **** good for that amp

What are you complaining about they got the same results?

1100@ 1.15ohm

 

[yunvme666 10+ year member]

is that the old d2 or the new d2 ? cause i know i ran my newer one daily at .7 with no problems at all.....