Hypothetical question. Lets say I have a headunit and an amp that I have dialed in using a DD-1. The amp has a lot more power than I need for my current speakers. I bought the amp so I could grow into it. I'm assuming I use the gain on the amp to tame it down to match the power the speakers need to sound their best. How do I know where to set it? I have a DMM and know how to use it. Thanks in advance for any responses.
-
2Participant count
-
Participant list
blazian87 10+ year member
CarAudio.com Elite
You actually want to set the gains by ear when it comes to speakers. You can use the DD-1 as a reference to know how far you can go but that's about it. It's more helpful for subs honestly.
Activity
No one is currently typing a reply...
Similar threads
I've moved this post to installations. Can't work out how to delete it here.
- Started by CoalMarx
- Car Audio Build Logs
Mine were as short as possible and still I had issues routing them cleanly
- Started by kanihoncho
- Wiring, Electrical & Installation
I agree with every one above. OFC is much better. Copper is a much better conductor than aluminum.
- Started by kanihoncho
- Wiring, Electrical & Installation
The umm1 is just a rebadged dayton/minidsp mic.
I personally have a umik2 and use a regular usbc-usbc to hook it up to my laptop and a...
- Started by JoeMama541
- Amplifiers
One or two, they are still subwoofer outs and are mono summed signals from both left and right. Even the 2 RCA subwoofer pre-outs on the 2nd one...
- Started by kanihoncho
- Speakers
About this thread
Latest topics
-
-
-
-
-
Cost of amp power install kits vs individual products
- Started by kanihoncho
- Replies: 3