SOLD SI Mag v4, Arc Audio mini amp, Digital Designs mini amp, misc wiring etc.

pepsican
10+ year member

Senior VIP Member
326
0
iowa
I just sold my Subaru Impreza and gutted all of the electronics out of it. I was going mainly for a stealthy install that added minimum weight. This car was not my daily driver. I have two amps from the install:

DD SS1 - It's small. Really small. Rated at 600x1 at 1ohm, but has been tested to do 1000k+. It drove my SI Mag V4 without any problems with juice to spare:

1zoz1bk.jpg


I also have a arc audio 125.2. It's even smaller. 65 x 2 @4ohm 125 x 2 @2ohm & 250 x 1 @4ohm mono:

o0s1si.jpg


126a26g.jpg


Both amps are in very good - excellent condition. I can't say enough good things about them. I was able to mount both of these inside a small glove box. Awesome. $200 shipped per amp.

I also have a SI Mag v4. You can go here for the specs:

Stereo Integrity | SI Mag V4

Bought new for the suby. Great sub with a small mounting depth and minimal weight. Great SQ, decent SPL. $175 shipped:

2lkbl2c.jpg


MISC wiring - I have maybe 12 ft of 1/0 gauge, lots of 4 gauge, a 4 way RCA set, distro blocks, fuses, etc. Basically everything I used to wire the two amps and speakers. I will go through everything and see what I have later if someone is interested. Would much rather this be a package deal.

I also have a 12" enclosure from audio integrations made for an 02-07 wrx/2.5i impreza. It's in good condition, but I had to glue the trim ring to the cut out so my SI mag would fit. Besides that, it is in great shape, just needs to be vacuumed. $250 shipped:

kdmz3s.jpg


Only trades I'm looking for would be a double din receiver w/nav or a nice portable navigation unit.

 
Last edited by a moderator:
Get some cash together //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 
Someone asked about a combo deal, how's this:

DD amp

AA amp

All of the wiring I posted about earlier

$300 shipped

Get some!

 
Last edited by a moderator:
Subaru enclosure sold bump. Just the amps and wire left. Not sure if I put this down before but I still have the original boxes and everything for them.

 
I went over the wire. All of the power wire is stinger custom pro.

1/0 gauge black - ~13 feet and ~1.5 feet

1/0 gauge red - ~ 3 ft

4 gauge red - 2 sections, ~4 ft

4 gauge black - 2 sections, ~3 ft

I chose black for the main power wire because it looked less out of place in the engine compartment. Not a big deal since I split the 1/0 and made the switch from black to red for the power wire. This might confuse some people, so I figured I would mention it. The fuse holder is tsunami ANL style. The RCAs are 4 channel stinger, and I have two 1/0 to 4gauge distro blocks. On top of that I have ~40 feet of stinger 12 gauge speaker wire.

Also, T shaped no fuse.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

About this thread

pepsican

10+ year member
Senior VIP Member
Thread starter
pepsican
Joined
Location
iowa
Start date
Participants
Who Replied
Replies
68
Views
5,223
Last reply date
Last reply from
winkychevelle
1716436519534.png

Doxquzme

    May 22, 2024
  • 0
  • 0
tip.gif

1aespinoza

    May 22, 2024
  • 0
  • 0

New threads

Top