SA-12 Flush Mount Kerf Port Box Design

[ancorp 10+ year member]

The last one you designed looks great. 2 cubes at 32hz with just over 30" of port area should do you quite well.

 

[MikeyL 10+ year member]

With the S shaped port?

I like it and think it'll look better once I do a final rendering so the depth is 1/2" less like it was in Torres and the port is fixed. Won't look as short on the end piece.

 

[mklett33 10+ year member]

With the S shaped port?I like it and think it'll look better once I do a final rendering so the depth is 1/2" less like it was in Torres and the port is fixed. Won't look as short on the end piece.

You have 14.5" of depth, why add more bends to the port than what you need? You could easily run that port along the back wall.

 

[n8skow 10+ year member]

^This

That curvy port looks cool, but your sacrificing a bit of efficiency, and making it more complicated than it needs to be...

You have 14.5" of depth, why add more bends to the port than what you need? You could easily run that port along the back wall.

 

[RangerDangerV2 5,000+ posts]

View attachment 26546793

okay Benda.