Rust on bottom of car...

SRLMJ23
10+ year member

Junior Member
28
0
New York
I would like to fix the rest on the bottom of my car, it just looks hideous!!! Anyway, I've heard of this stuff that you can spray on the rust and it will turn it black and make it hard, however, I have never seen it at my local auto store. Can someone give the names of some you can buy at like Advanced AUto Parts, Auto Zone, NAPA, etc...I really appreciate your help. Thanks in advance.

 
I would like to fix the rest on the bottom of my car, it just looks hideous!!! Anyway, I've heard of this stuff that you can spray on the rust and it will turn it black and make it hard, however, I have never seen it at my local auto store. Can someone give the names of some you can buy at like Advanced AUto Parts, Auto Zone, NAPA, etc...I really appreciate your help. Thanks in advance.
I believe the best is called Mar-hyde or something 1 step. You spray it on and itll turn it to a black primer. You can also look into the eastwood catalog at some of their rust converters.

I cant remember but i dont think undercoating will help what is already rusted, itll just prevent more. He needs to convert what is there.

 
I actually used this stuff by Krylon called Rust Inhibitor...sanded the rust off, laid down a few coats of the semi-flat inhibitor then once that was dry I laid down a nice shiny coat of inhibitor and I have to say it looks really good, WAY better than I thought it would!!!

 
dont go to autozone, go to an automotive paint store. they will have what you need. they should have lots of rust inhibitors the best is por 15 . you can order it online.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Time alignment is used to delay every speaker closer than the furthest to have the sound hit the listeners ears at exactly the right time. If this...
8
593
I agree with every one above. OFC is much better. Copper is a much better conductor than aluminum.
6
358
Im pretty curious as well.I am wondering what all took place for the supply for the demand?
12
537
I do not see a problem with an addition of up to a 600 RMS Class D mono amplifier with 4 ga OFC wiring supply kit and be fine. It would be...
10
519

About this thread

SRLMJ23

10+ year member
Junior Member
Thread starter
SRLMJ23
Joined
Location
New York
Start date
Participants
Who Replied
Replies
5
Views
3,363
Last reply date
Last reply from
burzendowski
1000007975.jpg

Mr FaceCaser

    May 16, 2024
  • 0
  • 0
1000007974.jpg

Mr FaceCaser

    May 16, 2024
  • 0
  • 0

New threads

Top