running a 1000 watt power RF amp on 2 T1's

[nickolas_j_t 10+ year member]

http://cgi.ebay.com/ROCKFORD-FOSGATE-T10001BD-1000W-MONO-POWER-AMPLIFIER_W0QQitemZ370144219978QQcmdZViewItemQQptZCar_Amplifiers?hash=item370144219978&_trksid=p3286.c0.m14&_trkparms=72%3A570|66%3A2|65%3A12|39%3A1|240%3A1318|301%3A1|293%3A1|294%3A50

reading that, it has 1,400 + actual watts. The RMS for T1's is 600 each. Would that be bad on the amp running it at 1400 at 1 ohm. The T1's are D4. Would that really matter? thanks.

Click to read more...

 

[goingdef 10+ year member]

i run a T1000.1 bd on a single T215D2 wired to 1ohm and it works great also had two T1 10"s on the same amp at 1ohm and it did great until I went to the 15"

 

[nickolas_j_t 10+ year member]

do you think it puts out more than 1,000? I want to get all potential out of these, so I dont really want them underpowered.

 

[roarzorz 10+ year member]

That is a great amp & sub combo. Those subs will handle a T1k all day long without breaking a sweat. The T1ks are known for being under-rated. I had a pair that both did 1400-1500watts.

 

[nickolas_j_t 10+ year member]

good. I really don't want to underpower them.