Rub's are sensitive to vibration?

[Tek18 10+ year member]

i have a 2005 Toyota Highlander, i have 3 rowes of seats, and the 3rd row folds down so its flat in the back and my sub is sitting on that //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

imagin a box here //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[wenn_du_weinst 10+ year member]

take out seat, build amprack, put box on top of amp rack

 

[disturbed471985 5,000+ posts]

Makes sense now lol. U can get ur rubber spacer and Velcro all at the depot.

 

[Tek18 10+ year member]

wish i could but i still need to use this car for family things so i will have to take the box out every once and a while to fit other things in

 

[KnightWhoSaysNI 10+ year member]

well then just get rid of your family... //content.invisioncic.com/y282845/emoticons/santa.gif.e1ec9cf2e0a0dd232ad35aa594a126d0.gif

 

[audiobaun 5,000+ posts]

Well, not being secured down tightly, that velcro may give in a fender bender/qiuick stop, and that box may go flying towards the front of the vehicle, and knocking out little Johnny, and Sue, while the rest of the remaining pieces come flying towards you, and mom possibly knocking both of you out, and taking an eye out, doesnt seem very appealing to me.Id at the least,buy a couple rachet straps,and maybe attatche some of those handle hinges to the backside of the box, and, a set to the floor in front, and rachet strap that joker down tightly for the safety of the family, at the least, and will be easily to secure, and remove.After a while Velco get full of lint shavings, and doesnt grab.The strongest ive seen made is the grey, and only secures up to 75lbs, as the cheapset of rachet straps/pair hold at least 150-300lbs?Just my opinion, and trying to look out for the safety concerns with your family in mind,and a failure of security of a 100-300lb box/amp:eyebrow:

 

[DonH 5,000+ posts]

rub's are sensitive due to the cheaper manufacturing methods. Less screws holding the board. much like the RD 3250 v2's but not as bad lol. it allows the board to move more causing some fet legs to break and then POOF