ARMed&Bangin 10+ year member
Senior VIP Member
I bought a bunch of this stuff in bulk to do a few builds, and I'm now finished. Was wanting to get rid of some of this.
I purchased the pink connectors from an electrical supply store as 1/0, but I was having a VERY difficult time getting the Kicker Hyperflex to get in there. I had to snip about a quarter of the wire off just to get it in. So I then ordered the 4/0 (purple) and it slid right in. I smashed it flat in my vice, then used a centerpunch in the middle of it for a lil added security.
From my experience, not all 1/0 wiring is the same. Some Scosche (spelling??) 1/0 slid easily into the pink connectors, whereas it just wasn't happening with the Kicker Hyperflex. With that being said, I've taken the liberty of including the ID (inside diameter) of the terminals to avoid you buying something that isn't going to work with your wire:
Pink 7/16" inside diameter Ring hole diameter is 3/8"
Purple 9/16" inside diameter Ring hole diameter is 3/8"
Yellow 11/16" inside diameter Ring hole diameter is 1/2"
Let me apologize aforehand for the quality of the pictures. Digital camera's on the fritz...had to take pics with my phone.
These terminals are copper, with a painted coating to prevent corrosion. If needed, I can get a cross cut picture on here. Just let me know.
I will sell and ship in multiples of 5.
Pink-$5 shipped CONUS
Purple-$6 shipped CONUS
Yellow-$8 shipped CONUS
The only trades I will consider is a NSB-90 (+ $$ on my end of course), some 3.5" speakers or some fiberglass material (mat, resin, etc.). I want to try my first fiberglass project--some speakers on the dash of my CRX.
I purchased the pink connectors from an electrical supply store as 1/0, but I was having a VERY difficult time getting the Kicker Hyperflex to get in there. I had to snip about a quarter of the wire off just to get it in. So I then ordered the 4/0 (purple) and it slid right in. I smashed it flat in my vice, then used a centerpunch in the middle of it for a lil added security.
From my experience, not all 1/0 wiring is the same. Some Scosche (spelling??) 1/0 slid easily into the pink connectors, whereas it just wasn't happening with the Kicker Hyperflex. With that being said, I've taken the liberty of including the ID (inside diameter) of the terminals to avoid you buying something that isn't going to work with your wire:
Pink 7/16" inside diameter Ring hole diameter is 3/8"
Purple 9/16" inside diameter Ring hole diameter is 3/8"
Yellow 11/16" inside diameter Ring hole diameter is 1/2"
Let me apologize aforehand for the quality of the pictures. Digital camera's on the fritz...had to take pics with my phone.
These terminals are copper, with a painted coating to prevent corrosion. If needed, I can get a cross cut picture on here. Just let me know.
I will sell and ship in multiples of 5.
Pink-$5 shipped CONUS
Purple-$6 shipped CONUS
Yellow-$8 shipped CONUS
The only trades I will consider is a NSB-90 (+ $$ on my end of course), some 3.5" speakers or some fiberglass material (mat, resin, etc.). I want to try my first fiberglass project--some speakers on the dash of my CRX.