re or diamond

[jmkanek 10+ year member]

im looking to go with four 15's in my next build was looking at the reaudio se 15's and the diamond audio d3 15's just wondering which would be better ill be feeding them around 1000wrms a piece, if yall know of anyother 15's around the same price around 150 dollars a piece im open to ideas jus tryin to get louder

Click to read more...

 

[thegreatestpenn 5,000+ posts]

se's between those 2 easily

 

[jmkanek 10+ year member]

specs on the diamonds are:

* Sensitivity: 88 dB

* RMS Power Range : 500 Watts

* Peak Power Handling: 1000 Watts

* Impedance: Dual 2 Ohm

* Low Frequency response: 20 Hz

* High Frequency Response: 250 Hz

* Diameter: 15 Inch

re specs are:

Nominal Impedance -Znom: Dual 4 ohm

Thermal Power Handling -Pe: 600 W

Force Factor -Bl: 17.75

Electrical Q Value -Qes: .55

Mechanical Q Value -Qms: 4.3

Total Speaker Q Value -Qts: .49

Free Air Resonance -Fs: 22 Hz

Equivalent Compliance -Vas: 209 liters

One-Way, Linear Excursion -Xmax: 18 mm

Efficiency - SPL 1W/1m: 88 dB SPL

Effective Piston Area -Sd: 810 cm^2

DC Resistance -Re: 2.8 ohm

Mounting Depth - 7.75”

Mounting Hole Diameter - 14”

Overall Diameter - 15.5”

Bolt Hole Circle - 14.75”

Motor Width - 6.25”

Motor Depth - 3.25”

Basket Depth - 4.5”

Displacement - .17 cu. ft.

Weight - 23 lbs

Dual Composite 2-piece Cone

Rubatek Foam Surround

Cast Aluminum Basket

Tork-Tite Terminal

3" 4-layer Aluminum Voice Coil

FEA Optimized Motor Structure

Triple Stack Maganets

Progressive Spiders

Wrap around Rubber Gasket

im leaning more towards the reaudios, but any opinions is appreciated

 

[quite_one]

you know factory specs are always off.i would stick with what you got already

 

[gearhound17 10+ year member]

i vote se as well