Re-coned SA8's

[Electrodynamic 10+ year member]

1. Product: Re-coned SA 8" subwoofers.

2. Specs:

D2

RE: 3.28 ohms (series)

FS: 41.6 Hz

Qes: 0.513

Qms: 6.606

Qts: 0.476

Le: 2.778 mH

Vas: 3.285 L

BL: 17.138 N/A

Cms: 83.341 um/N

Mms: 175.654 g

Sens: 78.476 dB @ 1w/1m

D4

RE: 6.08 ohms

Fs: 44.66 Hz

Qes: 0.594

Qms: 6.337

Qts: 0.545

Le: 4.26 mH

VAS: 4.44 L

BL: 21.20 N/A

Cms: 80.8 uM/N

Mms: 157 g

Sens: 80.06 @ 1w/1m

3. Description/Condition: Re-coned and in perfect working order. The drivers are being sold as-is with no warranty. I bought a lot of used motors from Jake, am cleaning them up, putting new baskets and spacer rings on them and re-coning the drivers with all new soft parts. For those of you who don't know me, I own Stereo Integrity and am a partner/subwoofer designer for Obsidian Audio and I also build production drivers, do re-cones, and drop-in's for Sundown Audio.

I can build any SA-8 you want. Normal coils are dual 2 Ohm and dual 4 Ohm. Right now I'm focusing on the 12-spoke basket but later on I will get into the newer style basket models.

If you are interested in these you MUST EMAIL ME YOUR ZIP CODE!!! My email address is subs@obsidiancaraudio.com.

4. Price: : $90 plus shipping.

5. Pictures:

(List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)).

Click to read more...

 

[Kangaroux 5,000+ posts]

Just out of curiosity, what do you guys use to measure woofer specs? WT3?

 

[j&b4ever 10+ year member]

i have a blown 1 if you want to buy it

 

[SPLaudio 5,000+ posts]

ttt for Nickelodeon, good guy here...

 

[Electrodynamic 10+ year member]

Two Dual 4's are sold. I still have two Dual 2's available.

I'm building these on a need basis. I'll stock up a few for a while but I have a lot of these motors at my disposal so I can build as many as people want.

 

[j&b4ever 10+ year member]

do you no where i can get a new surround to fit the sa-8

 

[Electrodynamic 10+ year member]

You will need to get them re-coned because you can't simply glue on another surround.

But back OT, I'm building two more dual 4's right now and will be ready for Corey on Thursday. I still have two dual 2's sitting here waiting to be snagged up! //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[coreyjerome 10+ year member]

thank you cant wait to get them!

 

[statonburrell 10+ year member]

could you make me 4 d2s with the new baskets?

 

[Electrodynamic 10+ year member]

could you make me 4 d2s with the new baskets?

All of my re-cones have new baskets, rings, and soft parts. I can make you two more D2's for a total of four. You will need to email me with your zip code and a description of what you want. (email addy is in my first post)

 

[Electrodynamic 10+ year member]

Corey, if you see this please respond to my last email. If I don't hear from you today I'm not going to build them up to be ready by Thursday because I need to know if you want two or three.

 

[Electrodynamic 10+ year member]

Four dual 2's are being built for Staton this week. //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif I'll get the all of the hard parts assembled tonight for sure.

 

[Electrodynamic 10+ year member]

Staton's four 8's are almost done. The shims come out tomorrow at which point they will be tested to ensure proper operation, dust caps put on, tested again, and then shipped out by the time the FedEx man arrives!

 

[Electrodynamic 10+ year member]

Staton's drivers had to wait until the glue was dry on the dust caps so they will be going out on Monday.

I have replied to all shipping quote questions so check your emails. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[j&b4ever 10+ year member]

how much to recone my older sa-8