Rattle

[Hjbennett 10+ year member]

Rear bumper guard behind tire is slack. Rattles horribly. There are no screws or bolts to tighten. Can you just push nozzle up in there and fill with expandable foam?

Any drawbacks to doing this?

Click to read more...

 

[goingdef 10+ year member]

be careful with that foam it will distort or oil can body panels if there overfilled.

 

[Hjbennett 10+ year member]

be careful with that foam it will distort or oil can body panels if there overfilled.

That never even cossed my mind! Thanks. Ill try to remove the wheel well cover and see what other options i can come up with.

 

[JoiNt- 10+ year member]

the only thing i put the expandable spray foam in was my trunk lid in my old car the "good stuff" or w.e its called i wudnt do anything else

 

[Hjbennett 10+ year member]

Any suggestions for my problem?

 

[JoiNt- 10+ year member]

sound deadening on the inside of ur trunk, top bottoms and sides might keep the pieces from vibrateing on the outside too much

 

[Hjbennett 10+ year member]

sound deadening on the inside of ur trunk, top bottoms and sides might keep the pieces from vibrateing on the outside too much

Started sound deadener today. Did rear deck and trunk lid. Will do sides and bottom tomorrow. But as loose as the bumber cover is i dont think this will fix my problem.