Quick ?

[DaBaller504 10+ year member]

I got a lanzar vibe, 1200x1 at 1 ohm, rated at 1262 rms

I have 4 comp vr's

The problem is two are dual 2 ohm, and 2 are dual 4 ohm, is there anyway I can wire that to a 1 ohm load?

I could use some help so please comment

Click to read more...

 

[Bumpin03 10+ year member]

i believe it can be wired down to 1.5 ohms.

Wire the D2 down to 1 ohm and the D4 down to 2 ohms....wire those together to get yourself a 3 ohm load. Do the same with the other 2 subs and wire those down to 1.5 ohms. Thats the closest you can get i believe.

PS: wouldtnt recommend doing this. if your subs have different impedance ratings...they will be receiving different amounts of power. //content.invisioncic.com/y282845/emoticons/rolleyes.gif.c1fef805e9d1464d377451cd5bc18bfb.gif

 

[DaBaller504 10+ year member]

Will that hurt the subs???

at 1.5 ohms, I wont be losing much power at all right?

 

[DaBaller504 10+ year member]

will that hurt my subs, or will it just be hard to get them to sound the same

also will i lose much wattage from 1 ohm to 1.5, 1262 rms at one, what do you think at 1.5

 

[FAM4LIFE 10+ year member]

What does that amp do at 2-ohms? The watts will fall somewhere in between.