2 x Rockford Fosgate Punch 100ix Bridgeable 2-channel Amplifiers
1 x Rockford Fosgate Punch 4020dsm Bridgeable 4-channel Amplifier
2 x Rockford Fosgate Punch Links
11 X-Cards: 2 OEM, 2 Empty & 7 Custom Values
As most of us probably know, RF amps are dramatically underrated, especially the older models. These amps have unregulated power supplies - the higher the input voltage, the higher the output wattage. That being said, below are scans of the specs from the owner's manuals, and a scan of the "Birth Certificate" for Punch 100ix #1; Punch 100ix #2 produces similar numbers.
Punch 100ix:
Punch 4020dsm:
I've owned 100ix #1 since new and have the original box and Punch Verification Certificate for it; I have the manual as well but couldn't locate it for the pictures - if desired, I will do my best to find it before shipping. I bought the other 2 amps used (they were only 1 - 1.5 years old) from the owner of an authorized Rockford Fosgate dealership who had owned them since new. I have PDF copies of the owner's manuals and will include them as hard copies, on CD, or both. Amps have never been abused, mistreated or overheated and all are in 100% perfect working condition. I ran the 100s @ 8ohms bridged each driving a pair of Punch Classic 12" subs, and the 4020 @ 4ohms bridged driving 5.25" MB Quart components...they loved the 5V audio signal I put into them. 100ix #1 is basically flawless. 100ix #2 has very small nicks on the top of the side fins as well as a couple on the endcaps, and a nick on the inside lip of the signal end but will not be seen after installation; also, the endcap is from a 100dsm because the dealer I purchased the amp from could not locate the original. The 4020dsm has some very small nicks on the top of the side fins as well as a couple on the endcaps, and a light scratch on the inside lip of the signal end but will not be seen after installation either; all blemishes can be easily touched-up and will disappear. None of the endcap mounting holes or wire terminal blocks are stripped (or broken), nor are there any missing set screws or X-card covers. The Punch links are both brand new in the box, still shrink-wrapped and with the original screws in sealed bags - these have been known to sell for $75 - $125 each. Also included in the deal are 11 X-Cards (and 1 spare cover) - the amps can be configured to run low-pass, high-pass or full range depending on the orientation of the X-card in the slot. The 4020dsm has 2 slots: 1 for the front inputs and 1 for the rear inputs, and the 100ix models have 1 slot each. The included card values are: 2 OEM cards @ 100Hz, 1 @ 26Hz (high-pass for subsonic filter), 1 @ 72 Hz, 3 @ 80Hz, 1 @ 88Hz, 1 @ 1kHz and 2 "empty" cards ready to customize with standard 1/4 watt resistors. I will include the resistor/frequency chart - any of the cards can be modified to the desired frequency using basic soldering skills. These guys are in about the best shape possible for used equipment of their year - the buyer will not be disappointed with these rock-solid, amazing sounding amps. I also have a non-working, fairly decent shape Punch 200ix that I will include in the deal for FREE + shipping. It has the "Rockford Fosgate" endcap only.
($695) $675 (PayPal - I eat the $20.25 fee //content.invisioncic.com/y282845/emoticons/verymad.gif.3f39c5c2fd57527b671fad3efdfac756.gif ) USPS Shipped to CONUS, Insured & w/Delivery Confirmation. PM me for payment details/other shipping options. They will be very well packed to make sure that you receive them in the same condition they were in when they left my possession. I'm not looking for trades, but I will take an Eclipse ECL-SC1 as partial payment. Buy with confidence: click the links in my signature (below) for references. Thanks for looking...rock on!
More pics HERE
1 x Rockford Fosgate Punch 4020dsm Bridgeable 4-channel Amplifier
2 x Rockford Fosgate Punch Links
11 X-Cards: 2 OEM, 2 Empty & 7 Custom Values
As most of us probably know, RF amps are dramatically underrated, especially the older models. These amps have unregulated power supplies - the higher the input voltage, the higher the output wattage. That being said, below are scans of the specs from the owner's manuals, and a scan of the "Birth Certificate" for Punch 100ix #1; Punch 100ix #2 produces similar numbers.
Punch 100ix:
Punch 4020dsm:
I've owned 100ix #1 since new and have the original box and Punch Verification Certificate for it; I have the manual as well but couldn't locate it for the pictures - if desired, I will do my best to find it before shipping. I bought the other 2 amps used (they were only 1 - 1.5 years old) from the owner of an authorized Rockford Fosgate dealership who had owned them since new. I have PDF copies of the owner's manuals and will include them as hard copies, on CD, or both. Amps have never been abused, mistreated or overheated and all are in 100% perfect working condition. I ran the 100s @ 8ohms bridged each driving a pair of Punch Classic 12" subs, and the 4020 @ 4ohms bridged driving 5.25" MB Quart components...they loved the 5V audio signal I put into them. 100ix #1 is basically flawless. 100ix #2 has very small nicks on the top of the side fins as well as a couple on the endcaps, and a nick on the inside lip of the signal end but will not be seen after installation; also, the endcap is from a 100dsm because the dealer I purchased the amp from could not locate the original. The 4020dsm has some very small nicks on the top of the side fins as well as a couple on the endcaps, and a light scratch on the inside lip of the signal end but will not be seen after installation either; all blemishes can be easily touched-up and will disappear. None of the endcap mounting holes or wire terminal blocks are stripped (or broken), nor are there any missing set screws or X-card covers. The Punch links are both brand new in the box, still shrink-wrapped and with the original screws in sealed bags - these have been known to sell for $75 - $125 each. Also included in the deal are 11 X-Cards (and 1 spare cover) - the amps can be configured to run low-pass, high-pass or full range depending on the orientation of the X-card in the slot. The 4020dsm has 2 slots: 1 for the front inputs and 1 for the rear inputs, and the 100ix models have 1 slot each. The included card values are: 2 OEM cards @ 100Hz, 1 @ 26Hz (high-pass for subsonic filter), 1 @ 72 Hz, 3 @ 80Hz, 1 @ 88Hz, 1 @ 1kHz and 2 "empty" cards ready to customize with standard 1/4 watt resistors. I will include the resistor/frequency chart - any of the cards can be modified to the desired frequency using basic soldering skills. These guys are in about the best shape possible for used equipment of their year - the buyer will not be disappointed with these rock-solid, amazing sounding amps. I also have a non-working, fairly decent shape Punch 200ix that I will include in the deal for FREE + shipping. It has the "Rockford Fosgate" endcap only.
($695) $675 (PayPal - I eat the $20.25 fee //content.invisioncic.com/y282845/emoticons/verymad.gif.3f39c5c2fd57527b671fad3efdfac756.gif ) USPS Shipped to CONUS, Insured & w/Delivery Confirmation. PM me for payment details/other shipping options. They will be very well packed to make sure that you receive them in the same condition they were in when they left my possession. I'm not looking for trades, but I will take an Eclipse ECL-SC1 as partial payment. Buy with confidence: click the links in my signature (below) for references. Thanks for looking...rock on!
More pics HERE
