No, but when you run speakers active you have control over each driver. I can help you set them up. Do you need help choosing your other equipment? HU, amps, DSP, etc?Hey trumpet
i have a question about this set do you know the recommended rms of what each of the components in this set can handle as i want to run these active
thanks
can you give me the dimensions for the smallest recommended sealed enclosure for this sub
American Bass - VFL-8D
also i will be using the 2010 Acura TL SH-AWD stock head unit it has the ELS 10 speaker system. up front are two 1.7inch tweeters in their respective L/R a-pillar Location between them is a 3.5 center speaker front doors have 2 6.7 inch mid-bass drivers rear doors have 2 3.5 in mid range drivers rear deck has 2 more 6.7 inch mid-bass drivers and a 8in sub between them in a very very crude & simple enclosure.
Thanks trumpet
I see you want to use all of the factory speaker locations but you want to gut it all except the head unit and factory amplifier. To do this properly and actually acheive better sound than what the factory provided takes a lot more than just finding speakers to fill holes. While I can sell you products to accomplish this goal, what you really need is a hands-on expert to execute this plan and support you in the future.
I would be happy to help you locate a reputable car audio shop in your area. I would hate to see you spend a lot of money and end up with a mess.
Why on earth would you get custom made amplifiers? Did I read this right, you want American Bass to make you these amplifiers? There are so many good amplifiers ready to rock with the option of fast replacement if needed.im looking at two companies that might build me two custom 5 channel amps one
Thank you for the compliment.now since looking at your video on you tube i thought about maybe doing a cdt set up except sub(still going with the vfl8)but here it goes
1 HD-1A/BL tweeters , 2 pair of HD 3
1 pr 3" mid-woofer(because i need three of these) & 2 pair of HD-6MDVC Cast 6.5" subwoofers for the mid basses
now i can power these by either the custom amps or 3 of the Precision Power Phantom class d amps
By the way you have a great system i feel its versatile for every style and frequency range of music I'm a recording engineer by trade so i can appreciate the work you put in Great Job.